As previously posted, I had worked out the details to my RAS cabinet using Sketchup. I started working on the cabinet this weekend and the reality of my previous work objected to the finest of my plans. With the miter bench not being sqaure, I have going to have to adjust my plans for the RAS cabinet.
I am going to have to take an inch off of the width of the cabinet and the torsion box. This is so I can make the cabinet square. I will then have to set the cabinet into its place and scibe filler strips in on each side to make up the difference. Oh well! Hopfully I can get this taken care of tommorow.
-- //FC - Round Rock, TX - "Experience is what you get just after you need it"
2 comments so far
Lee A. Jesberger
home | projects | blog
2898 posts in 517 days
posted 99 days ago
Hi sIKE;
That’s good news! My plans never work out either. I thought it was just me.lol
Have fun;
Lee
-- by Lee A. Jesberger http://www.prowoodworkingtips.com http://www.ezee-feed.com
sIKE
home | projects | blog
605 posts in 292 days
posted 99 days ago
Thanks Lee. I am working hard to make this cabinet square!
-- //FC - Round Rock, TX - "Experience is what you get just after you need it"