| This blog is written by Eric | 79 entries so far |
-
My Transitional Shop
We’re finally in Kota Kinabalu, the capital of the Malaysian state of Sabah, on the island ...
-
Last Post from the Mainland
Well, we’re moving in three days. We put 16 boxes on the boat, and I’ve dropped 12 bo...
-
Making a Marking Knife #4: Almost Done!
So I had a good couple days in the shop before I packed it all up the other day. Besides doing th...
-
Reverse Engineering Complete
A few weeks ago I shared about my problems resawing with a handsaw. Several people suggested vari...
-
Leaving My First Real Workshop
We’re moving in about 10 days to a different part of the country. Tomorrow the movers come ...
-
Making a Marking Knife #3: When the Bit's Too Small for the Brace
Still working on the marking knife. Now I need to drill a small (3/32”) hole for the tang o...
-
Making a Marking Knife #2: Filing a Bevel onto a Knife Blade (Aargh!)
Last week I blogged about making a marking knife from scratch. I had gotten as far as getting a g...
-
Malaysia Lumberjocks Gathering: 100% Attendance!
Today was the first (and only?) meeting of LumberJocks in Malaysia. Masrol (a.k.a. woodworm) came...
-
Making a Marking Knife #1: The Stock
I was wading through my old woodworking bookmarks, and stumbled across this great guide to making...
-
Step Stool #9: I'm #21!
So the big news of the day is that the results are out! I really didn’t expect to win, o...
-
Yeah. A Bandsaw Would Be Nice.
Today I began a little reverse engineering project for a friend. He saved a sofa from the junk he...
-
Dovetail Box #23: Reflections and Lessons Learned
In my very first post in this series, I said that I wanted to make something before building my w...
-
Making Chalkboards
This weekend my family went with a fellow church member to a sister congregation located among on...
-
Step Stool #8: Giving the Tenon a Wedgie
I know, I know. Juvenile title. I can’t help it. So it’s time for the wedges. By t...
-
Step Stool #7: I Don't Need No Stinkin' Jigsaw
When I was contemplating my curves and complaining about my coping saw, Marco suggested that I co...
-
Step Stool #6: Hand-Chopping a Mortise (with Video)
After I posted about doing my first hand-cut mortise and tenon, Scott wanted to see how I chopped...
-
Dovetail Box #22: How I Fixed the End Grain
From all the feedback I got on my end grain finishing problem, Kaleo had the biggest word (oxidiz...
-
Step Stool #5: First Hand-Cut Tenon
Today I was able to do both tenons for the supporting rail (rail? stile?) for the step stool I...
-
Dovetail Box #21: End Grain Finishing Issue
Okay, so I’m just about done. I’ve put the “last coat” on, and buffed it ...
-
Step Stool #4: Making Progress
For most woodworkers, especially those with the convenience and expedience of power tools, a step...
-
Power Tools, What a Mess!
Well I finally decided to get rid of my one remaining power tool, a 2HP Ryobi router with 3 bases...
-
Dovetail Box #20: Finishing Fun
Well, after my last post I decided to back up a step. I sanded down a bit with 360 grit, and then...
-
Dovetail Box #19: Is This a Finishing Problem?
So I’m working on finishing my wife’s Mothers Day box. I went with Marc’s varni...
-
Step Stool #3: Slight Design Modification
This one’s for you, Betsy! Commenting on my latest entry and picture, Betsy pointed out ...
-
Step Stool #2: Taking Shape
Next step: Sanding and Dovetails!
-
Step Stool #1: Starting from Scratch
Today I had my first real shop time since Mothers Day. I finished my wife’s box just in tim...
-
Dovetail Box #18: Finishing the Box
I have to admit, since I finished with the actual woodworking part of my wife's box, and presente...
-
LumberJocks on Twitter
I’ve been using Twitter for a few weeks now, and enjoy it. A few other LumberJocks are also...
-
Dovetail Box #17: Mothers Day Gift - The Box Is Done!
Back at the end of January (yes, 2008), I said that I wanted to make, and I quote myself, “...
-
Woodworking Safety Week 2008 #3: Super Glue: Safe for Treating Cuts?
Okay, okay, so the woodworking community has spent all week talking about how to be safe in the s...
-
Woodworking Safety Week 2008 #2: Hand Tool Safety Tips (Video)
In conjunction with Woodworking Safety Week 2008, here is my very first attempt at a video. I thi...
-
Woodworking Safety Week 2008 #1: Readers Poll: Choose the Tagline for Woodworking Safety Week 2008
As we kick off Woodworking Safety Week 2008, I thought I’d offer some improvement on market...
-
Dovetail Box #16: Gluing in the T-Keys
Last week I cut the grooves for my "t-keys" and the other day I glued up the lid. Yesterday, I gl...
-
Dovetail Box #15: Gluing Up the Lid
The moment of truth. The point of no return. The bridge beyond despair. Okay, I made that last on...
-
Dovetail Box #14: "T Keys"
When I asked for feedback on how to glue up the frame pieces for the lid to the box I’m wor...
-
My First Handmade Tool: The Allen Chisel
I’d been thinking about how to cut the slots in my box lid for the miter keys. The narrowes...
-
My Tools #4: The Tools I'm Most Proud Of
After talking about the most embarrassing tools I own, I thought it would be good to get my mind ...
-
Confidence
Last month, I posted about my adventures in hand-cut veneer. I was pretty proud of myself for how...
-
My Tools #3: The Most Embarrassing Tools I Own
This post was inspired by one with a nearly identical name over at Modern Woodshop. It seemed wor...
-
Necessary (and Stupid) Shop Time
On Saturday and Sunday I had a good several hours of shop time – my first decent shop time ...
-
So Little Experience, So Many Commissions
Somehow word has gotten out about my interest in woodworking. Who knows what message people are g...
-
Dovetail Box #13: Feedback Requested Before Lid Glue-Up
Okay, so I finished my panel grooves in my lid frame, and in the next day or two, I’ll glue...
-
Dovetail Box #12: Feelin' Groovy
Well, it’s been a while since I’ve had time to work on the box for my wife. But with ...
-
Happy Easter!
Hope everyone has a nice Easter this year. It’s already late afternoon here, after enjoying...
-
It's Hard to Find Shop Time
I’m guessing that most of you who read that entry title uttered, “Yeah, you and me bo...
-
Dovetail Box #11: Hand-Cut Veneer
So I don’t have access to store-bought veneer (no stores) and I don’t have a bandsaw,...
-
A Visit to a Malaysian Sawmill
I knew of a sawmill that was only about a minute’s drive from one of the places we used to ...
-
Can I Add This to my Resume?
Since I’m such a newbie and have already encountered lots of failures (I mean challenges), ...
-
Dovetail Box #10: Next Obstacle: The Lid
NOTE: As is my custom, my list of newbie questions are at the end of this post. So a week or t...
-
Going on a Snipe Hunt (eBay)
The other day I griped about early bidders on eBay – that post got more hits and comments t...
-
Ugly Sapwood Question
I posted this over in the forums yesterday, but it’s only gotten one reply (appreciate the ...
-
You're Screwing Up My eBay!
The following is a rant, provided free of charge to LumberJocks and visitors. I’m sick a...
-
Dovetail Box #9: Dovetails Glued Up, Now for the Top
No pics today, but there’s not much new to look at compared to last week's final fit. A big...
-
MyPoints - Your Ticket to Free Stuff
The Japanese ryoba saw I just got (and blogged about and reviewed) ended up costing me a total of...
-
My Tools #2: Who Needs a Ryobi When You Have a Ryoba?
I just posted a review here on LumberJocks on my new Japanese ryoba saw. Click here to read it. B...
-
Dovetail Box #8: Be Vewy Vewy Quiet - I'm Hunting Wabbets
Okay, so you’d think that doing the dovetail joints would have been the hardest part of thi...
-
Dovetail Box #7: The Dovetails Are Done!
Yes! Finally. The joints have all been cut, and the box is perfectly squared up. No glue yet,...
-
Dovetail Box #6: Doh!vetail Template - Product Recall
A couple weeks ago I made a dovetail template to use when making the box for my wife (I’m h...
-
Poll: Which Plane Should I Get?
Okay, so I’m in the market for a plane that will help me clean up my tenons and maybe do so...
-
My Workbench #2: Questions About the Top
I have to say, the thought of trying to flatten 16(ish) boards entirely by hand (for the bench to...
-
Price of Wood in Malaysia
Funny. In Malaysia, land of rampant logging (legal and illegal), I can’t seem to find reall...
-
I Really Need to Get Me a Patent for This Thing
Today when I finally got ready to start chopping my dovetails, I felt cramped way over on the...
-
Dovetail Box #5: Take a Deep Breath
So I’ve finally gotten the walls of the box flat. Well, mostly flat. They still wobble ...
-
Getting Creative with Little Space
I’m glad that I had a sharpening session directly on my temporary workbench, before I finis...
-
Dovetail Box #4: Making a Dovetail Template
Before I get to making the dovetails for my wife’s dovetail box, I thought I’d ma...
-
Dovetail Box #3: Almost Ready for the Dovetails
So I’ve got the pieces for my box cut mostly to size. The walls are all currently about...
-
My Tools #1: Mini Block Plane
I’m starting a new series with this post, figuring that I’ll want to talk more about ...
-
LumberJocks, A Threat To Bloggers?
I’ve been blogging since 2004, running an anonymous blog on my own little patch of electron...
-
Dovetail Box #2: When You Don't Plan Your Cuts
So I was thinking that I’d cut two (full-sized) 3/8” slices off of this block, an...
-
Dovetail Box #1: The Wood
I mentioned recently that I felt like actually making something before working on my bench. What ...
-
Shooting Board
A shooting board isn’t considered a major project – or even a minor one – f...
-
Saw Sharpening: Wear Steel Underwear on This Slippery Slope
I took a Woodcraft class last year called Hand Tool Basics and Sharpening. Took me through sharpe...
-
Jigs as Important as Tools
My wife is out of the country attending a conference, and while I do have kid duty (age 4.5 and 3...
-
I Have a Dream
I’ve never been a woodworker. Shoot, I was never even a handy man. For the first 35 of my 38 year...
-
First Dovetail, First Jig
I was considering using dowels to help hold my boards together for my benchtop; specifically,...
-
My Workbench #1: Lumber for the Top
One of the hardest things about building anything here is finding nice wood. It seems that if...
-
My "Starter Set"
[Taken from my Adventures in Woodworking blog, August 2007] Before heading back to SE Asia, I ...
-
Kinda Lonely Over Here
That’s me down there in the middle. Over 2,500 Lumber Jocks on this site and the closest on...
-
My Journey So Far
[Taken from my Adventures in Woodworking blog, August 2007] A few years ago, I came to the rea...
Posts here are (usually) taken directly from my main site, Adventures in Woodworking. Feel free to stop on by (my link is on my profile page) or grab my feed here!
By subscribing to the RSS feed you will be notified when new entries are posted on this blog.
Blog Series
- Dovetail Box - 23 parts
- Making a Marking Knife - 4 parts
- My Tools - 4 parts
- My Workbench - 2 parts
- Step Stool - 9 parts
- Woodworking Safety Week 2008 - 3 parts
Your Online Shop - Your Support Is Greatly Appreciated - Your Woodworking Showcase - 3 Ways To Help, Financially - Your Woodworking Community
