| Blog series by mot consisting of 2 parts so far |
Part 1: Shop Computer - Remote KVM via CAT5
Hi Folks, Many of you know that I’ve been trying to work out the shop computer situation. I had a number of suggestions given to me and most of them excellent, and all quite good. In true “Me,” fashion, I chose none of them and came up with another option. As most of you know, one of the greatest concerns about a computer in the shop, is dust. This is a big concern, because even a cheap computer can ingest a lot of dust but there also came the concern about the spac...
Part 2: Shop Computer Workstation
Well, this isn’t fine woodworking by any stretch of the matter. After figuring out the technology I was going to use for the shop computer, I failed to spend alot of time thinking where I was going to put it. I’ve been unhappy with a little inset shelving unit that is above my bench. It’s too small to really hold anything, serving a purpose for another use of my shop space about 10 years ago. In the picture, there is alot of crap stuffed into it, but most of it doesnR...
The bantering and ramblings of a hobby woodworker/lumberjock!
By subscribing to the RSS feed you will be notified when new entries are posted on this blog.
Blog Series
- 2 x 4 Challenge - 2 parts
- Auxillary Workbench - 6 parts
- Festool Resource Information Collection - 1 part
- Hand Tools - 1 part
- Jigs and Fixtures - 3 parts
- Rocking Horse - 6 parts
- Shop Multimedia - 2 parts
- Tools - 5 parts
- Turning a Bowl - 3 parts
Your Online Shop - Your Support Is Greatly Appreciated - Your Woodworking Showcase - 3 Ways To Help, Financially - Your Woodworking Community
