davidtheboxmaker

If you like working with wood, you’re in the right place. Welcome.

-- Bruce from Central New York

Glad to see that you have made Lumberjocks a part of your Woodworking experience… Welcome…

-- Max "Desperado", Salt Lake City, UT

Welcome to LumberJocks. Glad to have you aboard.

If you want to see some carving look up Roger Strautman's projects.

-- Karson Southern Delaware karson_morrison@bigfoot.com

Welcome to LumberJocks. Enjoy the community.

-- Bill - "Suit yourself and let the rest be pleased." http://www.cajunpen.com/

Welcome to the forum! We’re glad you’re here.

-- Tom, Surfside Beach, SC - Romans 8:28

Hey! Welcome to LJ!

-- You can discover more about a person in an hour of play than in a year of conversation. (Plato)

Welcome to LJ’s (Enjoy)
God bless

-- Gene, a Christian in Virginia

Hi everyone – thanks for all the words of welcome.
One enquiry was about the pivot details.
The pivots are made from African blackwood which I turn myself – I finish them at 4 mm which is as large as I dare go bearing in mind that the lid is 10mm thick – just enough room for some error in drilling. I use the skew for turning the pivots – this leaves a burnished finish that needs no sanding. I make lengths of about 2 1/2 inches long – any longer the timber flexes under the pressure from the skew and I can’t control the diameter.
The back of the lid, at the top, is rounded on the router table. I use a 9mm roundover bit – this give clearance for the lid to open without jamming against the back of the box. I drill the hole for the pivot 9mm forward from the back edge of the lid and it just allows the lid to open beyond the 90 degrees. I arrived at this on my third box using this type of lid after some trial and error on boxes 1 and 2.
Hope the above helps – if you need further details let me know and I’ll try to help.

Hi David, this is a great site, I’m glad you made it here, I’ll be looking for more of your work. Boxes are one of my favorite.

-- Ron, Twain Harte, Ca. Portable on site Sawmill Service http://westcoastlands.net/Sawmill.html http://westcoastlands.net/SawBucks2/phpBB3

Welcome to Lumber Jocks. show us some more of your work and add your wit and wisdom to the forums.

-- Thos. Angle, Owyhee Design, Oregon

Welcome to Lumberjocks!

-- Greg Mitchell--Lowell, AR--gdamitchell@sbcglobal.net

A belated Welcome, David.

Thank you for the kind comment on my Shamrock box.

-- Dick Cain, Hibbing, MN. http://www.woodcarvingillustrated.com/gallery/member.php?uid=3627&protype=1

We welcome you (a little late as well!) to the one and only LumberJocks. We hope that you enjoy your stay/visit each and every time you show up on our door step. If you should need any woodworking question answered, don’t hesitate to ask. Somebody’s gonna have a good answer for you.

-- Carpe Lignum - Seize The Wood,

Welcome to Lumberjocks. The projects are an inspiration, the information is priceless and the people are supportive. The only problem is, the site can get addictive.

God Bless
tom

-- Mc Bridge Cabinets, Iowa

Hi welcome to LJ’s

i love the look of your boxes and its nice to see another pom on lj’s
im interested in were you purchased your darker wood from as i like the contrast between light and dark and as im learning all the time any infomation or advise greatly appreciated

and if you dont mind i would like to add you to my buddies list

andy aka pommy

-- cut it saw it scrap it

Welcome to LJs. Better late than never. mike

-- Mike. Profisher50@yahoo.com