| Blog series by clieb91 | updated 140 days ago | 7 parts | 1405 reads | 52 comments total |
Part 1: Cabinet... Learning Experience
Well here they are, my first attempt at cabinets. I decided I needed additional storage and organization in my shop. So I started building these a few months ago, in between other goings ons. They are primarily built out of scrap and I used the Kreg Jig to join them. I based them loosely off of an article in “Shop Notes” and a cabinetry book I bought a while ago. I say loosely as due to using the scrap wood (and it being my first attempt :) ) I made some changes, some of which I n...
Part 2: A little Safer
Ok, So a little while back I posted a question about air filters and building one. Since then thanks to some Christmas money and a clearance at HD I actually purchased a Rigid Air Filter. I finally got it mounted this past week after few modification to the mounting concept. It seems the prefab floor joist they used to build this house are not what people think of when they tell you to mount it using the floor joists. So I added a little insulation to the ceiling and strapped the unit up. It...
Part 3: Woodworking Show Additions
Well now that Verizon has stopped digging up my front yard and my cable modem is back online I can post this. This past weekend was the Chantilly, VA woodworking show. I was able to get some time on Friday and Saturday to head out there. On Friday I met up with Karson and Greg as noted here in Karon's Blog. On Saturday I again met up with Greg as well as his brother Adrian and their families. I was happy to meet everyone. Thanks for all the input on various tools and also some great ideas. ...
Part 4: Budget friendly finds
Ok, just a quick blurb here about a budget friendly find on some hardware. I stopped at Target to see if they had any coat hooks for the next rack I am working on for a friend and found a few that were on clearance in their Home Improvement section. I then started looking around that section more. I was able to find a multi-pack of brush nickel drawer handles and also drawer pulls for around $4 on clearance as well as misc other hardware for as low as $0.24. I have no immediate use for thi...
Part 5: Starting Down that path, Lathe 1
Good Evening All, I am now the proud owner of a lathe. Can not wait to be able to post some kind of project that I make on it. BUT, first I have some other fun to deal with, the lathe is a 1970’s 12” Craftsman that i purchased off of someone on Craigslist. I tested it all out and it worked fine, however it was mounted to a very heavy table and since I have a basement shop I decided to remove it from the table before trying to get it down stairs. For beeing mounted to the same piec...
Part 6: A Bad & Good Week for the workshop
Well last Sunday we received around 4” of rain in a 24 hour period half of which came overnight. I happened to want to get something out of my shop on Monday morning and opened the basement only to be hit with the smell of “wet basement”. I quickly looked around and found some puddles and seepage around the whole basement but not a lof standing water. After coming home from work early I was able to better assess the damage, it seems my sump pump switch failed and the narrow ...
Part 7: More Water!!
Ok, So two weeks ago I somehow managed to get a 4 day weekend. I decided to work on my garage (see my latest project posting. I was going along great from Thursday all the way until Sunday (Mother’s Day) We came home from being out for about 5 hours to find the basement had taken on 7” of water it actually crested while I was trying to come up with solutions at 8”. This room is my new office that I just had someone finish mudding and priming for me on that Thursday, ...
By subscribing to the RSS feed you will be notified when new entries are posted on this blog.
Blog Series
- Office - 1 part
- Tool Overhaul - 1 part
- Workshop - 7 parts
Your Online Shop - Your Support Is Greatly Appreciated - Your Woodworking Showcase - 3 Ways To Help, Financially - Your Woodworking Community
