| Blog series by Woodshopfreak consisting of 3 parts so far |
Part 1: beginings
I have only cut the rabits in the bottom and sides, cut the datos for the deviders, cut the bottom, and made a half lap in the deviders to cross over. I still have to make my vennered top, make feet, and attach the top, as well as make a tray that will go into the top with I think will be 16 deviders. Please give any suggestions, and comments. Thank you. P.S Sorry for the to big of pictures. I have a camera that takes huge file sizes, and when I took the picture it was on high and the pict...
Part 2: Top veneer
I have picked out the venner I will be useing for the top of my jewlery box. I decided on birds eye maple. Now alot of people said to get some kind of rosewood veneer, but the birds eye maple was so beautiful and I couldn’t resist. I am going to be staining the oak with a nice brownish golden look, and the maple will probobly just be left the way that it is. It should look good with the oak when the oak is stained. I want to hear what you think about this choice. I think that it could b...
Part 3: The Top
Well after about four months I finely get a chance to make use of my shop. I have begun to work on my jewelry box once again. I started in january and got distracted by the huge shop renovation. Well here it is. I believe that it turned out better than expected. This was my fist attempt at veneering and I think that I did very well. It turned out great. I fist took a peice of poplar and milled it flat and then used two peices of 1/4 ply to work as calls and put about ten diffrent types of cla...
By subscribing to the RSS feed you will be notified when new entries are posted on this blog.
Blog Series
- Jewelry Box - 3 parts
- Shop Renevations - 4 parts
- Stool - 4 parts
- Wood Wisdom-Video Blog - 5 parts
Your Online Shop - Your Support Is Greatly Appreciated - Your Woodworking Showcase - 3 Ways To Help, Financially - Your Woodworking Community
