| Blog series by Toolz | updated 187 days ago | 3 parts | 839 reads | 16 comments total |
Part 1: Some photos of the worshop in progress
We moved in in May ‘07 and I started working to set up a workshop: workshop view from the back door towards front of shop 6/07 Back right corner 6/07 Back left corner 6/07 Corner bench 6/07
Part 2: More photos of tools and shop
As you can see to date I have added some lumber storage (Triton metal racks) and shop built cut-off and sheet goods racks on casters as well as a rack to hold 2×4’s or molding off the floor. We have also added more tools to the collection. I really need to get all this stuff organized. I’m still looking for thin walled 4” PVC to create a main line and drops for the new DC. The small system I started out with works pretty good for the band saw table saw and not so well w...
Part 3: Dust Collection System to date
After locating some 4” “green” sewer and drain line; I started to connect the dust collector. By using a series of “y’s”, elbows, and blast gates I was able to make a main branch that will run to the jointer, planer and large sander; a branch to a floor sweep, and a branch to the existing 2” duct line. I still have the second 4” connector on the main DC free for expansion if needed. So far I have just “friction fitted” these connect...
By subscribing to the RSS feed you will be notified when new entries are posted on this blog.
Blog Series
- Progress of setting up the Shop - 3 parts
- Samples of Crafts - 0 parts
Your Online Shop - Your Support Is Greatly Appreciated - Your Woodworking Showcase - 3 Ways To Help, Financially - Your Woodworking Community
