Workshop Make-Over #4: Outfeed Table

It has taken me a little longer than anticipated, isn’t always the way! Anyhow here are the layout drawings and the cutting list for the Out-feed table. The out feed table is was not a problem to build; it was a lot smaller than the other T-Box and I used the first T-Box as the base for the building the out-feed table.

I have fitted both of the tables together, levelled them and they have got there first coat of Finnish on them (Photographs next time). I have added a sketch of the two tables fitted to the table saw – showing the size.

The tables are level and relatively flat (there is some undulations especially where the two tables meet. This deviation in a planer surface is no more that 0.5mm (20 thou), I can live with that, especially since the DELTA out-feed and Side table had deviations greater that 1/8”

DELAYS – This has turned out to be a bigger job than first planned; it has affected every major machine in the shop to some degree or another. The result will be worth it, I will have more work surface and more free space. (Free space – free space – I have place for more tools {drool} now how do get them without the wife knowing???)

The big delay yesterday and today was having to reroute the dust extraction ducts and pipe work – I have shortened the system by 3m (10ft) of 6” pipe and removed a 90° elbow – so it should be more efficient??
Tomorrow, I hope to start tidying up, and take some more photographs. Monday I have to move the Band Saw and Drill press. Tuesday I start my next project (a bed)

-- Tony - All things are possible, just some things are more difficult than others! - SKYPE: Heron2005 (http://www.poydatjatuolit.fi)