Table saw system upgrade #1: Table saw system upgrade - the end product
It’s almost done. Actually, the saw end is usable. I haven’t cut the place for the Russeau router insert yet. The two major advantages are this is about 2” less tall than my other system which makes it far more easy for me to use and it is much easier to move. The extension is two pieces of MDF laminated and a piece of white board glued to the top of that. In my earlier design I had drilled into the extension and fastened the top to the right side of the saw with 3 bolts. That was really a task as there was no real room and I had to route out an area for the nuts. This time I just butted it up to the saw and used the metal extension bars to hold it in plac...
