LumberJocks

Coffee is tasting good this morning.

Blog entry by Sac posted 147 days ago 200 reads 0 times favorited 13 comments Add to Favorites

Good morning folks, the coffee for some reason is especially good this morning. No specific reason why, it just taste better this morning. My garage shop is coming along. I look forward to getting some pictures to share with you all. I’ve completed a few jigs. IE: 2 featherboards, sliding crosscut sleds (2) Push Sticks (3) and 2 Push Blocks. I used some of the non slip stuff on the push blocks and there is no way any wood will slip from them. I finished my lumber rack. I took 2 ideas from here and completed it and the installation of it on Wednesday this week, I weigh somewhere near 230 lbs and I gave it the SteveKorz test or the Michael Hacker test. I did pull ups on the top arms. I climbed and stood on the middle and bottom arms. It’s pretty solid. I got the Oscalatting sander in the other day and yesterday I put the WoodHaven Horizontal Table Kit, 578, 575 & 578HD. Took about 4 hours. Today I’ll start a project to organize tools and accessories under my main bench. Some spots will have drawers while other will be like cubby holes. The bench is like 36” deep so I will not be utilizing all of that space of course so I am trying to figure a way to use the back side. I may use it for wood that is 1×4x8 or less. Anyway that is about it for this morning. A few more cups of joe and I’ll be ready to go. I hope you all have a great weekend!

-- Jerry, Measure 10 times cut once. Set in the foothills of the Smokey's


13 comments so far

View thetimberkid's profile

thetimberkid

1684 posts in 243 days


posted 147 days ago

Sounds good, can’t wait to see some pics!

Thanks for the post

Callum

-- Look great, get your TTK merchandise now! http://www.printfection.com/thetimberkid/ Check out my site http://thetimberkid.blogspot.com/

View trifern's profile

trifern

5051 posts in 307 days


posted 147 days ago

My coffee is pretty good this morning also. Have a safe and productive day.

-- My favorite piece is my last one, my best piece is my next one.

View lew's profile

lew

1790 posts in 295 days


posted 147 days ago

Morning Sac!

Looking forward to the shop pictures!

Lew

View Mark Shymanski's profile

Mark Shymanski

715 posts in 253 days


posted 147 days ago

Morning Sac,

Coffee was goof here this morning also, it was probably the company! Sounds like your shop is coming along. I just flipped through and old (2003ish) American Woodworker where they’d build a shallow cabinet to rest at the back of a deep workbench, maybe that’d work for you?

Ahhh, the smell of coffee and sawdust in the morning….

-- ....next big purchase is wood for the next project, Mark

View brunob's profile

brunob

1391 posts in 709 days


posted 147 days ago

I’m with Mark – coffee and sawdust…what could be better. Sounds like your shop is comming along.

-- Bruce from Central New York

View Sac's profile

Sac

203 posts in 174 days


posted 147 days ago

Jamacian Blue Mountian some days and Hawaii Kona others…..

Hey Mark do you if that issue and article are online? I couldn’t find anything.

Thanks

-- Jerry, Measure 10 times cut once. Set in the foothills of the Smokey's

View Mark Shymanski's profile

Mark Shymanski

715 posts in 253 days


posted 146 days ago

I was reading it the old fashioned….let me look for it and I can post the issue and page numbers

-- ....next big purchase is wood for the next project, Mark

View SteveKorz's profile

SteveKorz

1419 posts in 254 days


posted 146 days ago

Aaaaaahhhhhhhhhhhhh…..... Cooooofffffffffffeeeeeeeee!... lol

Good for you regarding your lumber rack… I hope you enjoy it! I couldn’t do without mine…

-- As iron sharpens iron, so one man sharpens another. (Proverbs 27:17)

View Mark Shymanski's profile

Mark Shymanski

715 posts in 253 days


posted 144 days ago

Hey Sac,
I can’t find the article…I’ve borrowed a bunch of old magazines from a friend of mine and that may have been in the pile I’ve returned. If I can find a reference I will post it.

-- ....next big purchase is wood for the next project, Mark

View EdC's profile

EdC

427 posts in 381 days


posted 144 days ago

ssounds like its all coming together.
how is the spider bite doing?

-- Ed Collinge- Edmonds, WA.

View Sac's profile

Sac

203 posts in 174 days


posted 144 days ago

Thanks Mark. Don’t worry about it. I started the project Saturday. I may have found a solution. I need to take some pictures I suppose to let you all see the idea I came up with. Basically I used 3/4” plywood for the sides and shelves. Then routed 1/2” deep 3/4” grooves in the side panels for the shelves and drawer guides. The sides are 24” deep. The guides are 30 inch deep. I have used bearings mounted to the botton of each drawer unit that the drawers will slide across. I have placed drawer stops so they would not just fall out if I pulled them to far. This is my first attempt at making something even remotly similiar to this. Today I will build the drawers. The side of the drawers will be 3/4” plywood also to accept the guides. The back and bottom will be what we use to call gopher board. I’m not sure what it is really called but when I got the 4×8 sheets the lady called them Ecoboard. It is pretty strong stuff. It reminds me of what you would find in the bottom and sometimes in the back of drawers. Anyway I will get some pics.

Another reason I want to post some pictures is that a fellow gave me some type of a square. Well I am not sure it is called a square. I have no idea what it is called so I am certian that you all will know what it is.

Pictures to come soon.

-- Jerry, Measure 10 times cut once. Set in the foothills of the Smokey's

View Karson's profile (online now)

Karson

14328 posts in 941 days


posted 144 days ago

I’ve got the Woodhaven Router setup. It does a great job.

I screrwed a plastic caliper onto mine to show the distance that I raise the bit. I bought it for around $5.00 at Harbor freright on sale. It only measures in 100 of an inch so you have to guess for the .125 measurement. or I need to raise it .001 of an inch.

-- Karson Southern Delaware karson_morrison@bigfoot.com †

View Sac's profile

Sac

203 posts in 174 days


posted 143 days ago

Hello EdC, Thanks for asking. Actually it is doing very well. The outside of the finger still has some swelling. It’s hard to believe but it does. That is all that is left from the bite. I’ve killled 3 other recluses in the past couple of week. 1 in the house and 2 others in the garage.

Karson that’s a pretty sweet tool isn’t it. I look forward to using mine.

-- Jerry, Measure 10 times cut once. Set in the foothills of the Smokey's

You must be signed in to post the comments.

Your Online Shop - Your Support Is Greatly Appreciated - Your Woodworking Showcase - 3 Ways To Help, Financially - Your Woodworking Community

Woodworking StoreApparel StoreMake a Donation
Bookmark And Share This Page
  • View all advertisers
  • Advertise with us

DISCLAIMER: All views and comments posted by members are not necessarily those of LumberJocks.com or of those working on the site.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase