| This blog is written by Lee A. Jesberger | 31 entries so far |
-
Shop Featured on Delta |PorterCable #2: Project of the Month
Hi All; New Email from Delta. The Home Office Project photos that I submitted have been added ...
-
Shop Featured on Delta |PorterCable #1: Shop of the Month
Hi All; Apparently I joined an Owners Club on Delta’s website some time ago. I got an...
-
One year already? #1: Man, I'm getting old.
I just noticed today is one year since I joined LJ’s. Time really flies. I thought I was...
-
Homemade Tools #2: Wooden Dead Blow Mallets
I saw an article in a woodworking magazine, maybe it was shop notes, on making wooden mallets tha...
-
Demilune table tops #2: Scalloped Front Demilune
I started a new Style demilune table some time ago, but keep getting side tracked. A.D.D., I thin...
-
Router Table #1: A router table for use with Incra Accessoriess
I guess about ten years ago I made a second router table for certain applications. Mostly it was ...
-
Router Table Fence #1: It's not pretty but...
About twenty some years ago I bought a professional door making router bit set made by Freud. Inc...
-
Marquetry #1: An age old craft
Hi all; After reading Douglas’s blog on marquetry I figured I would add a few comments a...
-
Techniques #1: Gluing a mitered leg or post
In response to Dave in Texas’s question on a mitered joint, I thought I’d show an eas...
-
Custom Floor #1: Driving myself crazy
We did a floor a few years ago for my sister in law. She has expensive taste, and wanted a flo...
-
Veneering #3: Bath Vanity
Here’s a bathroom vanity we made for a client a number of years ago. I never got back there...
-
Custom Desk #1: Curved Dovetailed Drawers
Willie asked yesterday if I could explain how I make dovetails on curved drawers. I may have j...
-
Fine Woodworking does ezee-feed review #2: Ezee-Feed Gone Wild?
Hi everyone; Since a lot of LJ’s have been following the progress of my ezee-feed projec...
-
Fireplace Mantle #1: Fireplace upgrade
When my step daughter wanted to upgrade the fireplace mantle in her family room, we worked from a...
-
Fine Woodworking does ezee-feed review #1: Finally some exposure
I just got this notice from notice from Roger Strautman!! From: Roger StrautmanSubject: Ezee-f...
-
Burls #1: Burl the size of a car
Karson and I were talking on the phone the other night, the topic being burls. He poste...
-
Conference table / work bench #2: Construction Details
I thought I would include a few more photos, showing the construction details. I’m not s...
-
Conference table / work bench #1: Wenge and White Ash Table
It’s been a while since I posted any projects, so I figured I’d better ...
-
General Posts - non woodworking #1: You are special
Something my sister emailed to me, and I thought it was worth passing on to my friends!. Somet...
-
Proud of my Buddy #1: First attempt at carving
Hi all; I always mention my buddy Bruce, and here’s a post dedicated to him, (even...
-
Homemade Tools #1: Block plane and Joiner Plane
Just playing around in the shop and came accross these planes. I made them a couple years ago, an...
-
Not a woodworking project, But interesting
Not a woodworking project, but interesting, I think. I made jigs for these also. One...
-
Jigs #2: Multi Position Jigs
Making better use of you time includes making jigs that can be used in different ways, or positio...
-
Jigs #1: Templates and Jigs
Templates and Jigs Whenever we do a project that has the potential to be built again, or...
-
Veneering #2: Flattening Veneers
When using some veneers, they must be flattened prior to use. This is especially true of ...
-
Demilune table tops #1: Making Demilune Tables
As you may have guessed, I make many of these tables. The practice is needed, and ...
-
Vacuum series #1: Plexiglass Jigs
I was thinking whether or not to make this a continuation of the veneering bog, however...
-
Veneering #1: A Primer Course
Veneering, a Primer Course The top photo is a couple sample packs of sequenced matched vene...
-
Our Shop #1: Basic Layout
When designing the shop I tried to anticipate the type of work we would be doing. Look...
-
Living Room and Bar Project #1: #1
Some additional photos of the Living room and bar project Photo one shows the matching ...
-
Fine Woodworking & Ezee-Feed Review #1: Fine woodworking Mag Review of Ezee-Feed #1
Hey guys; I got an email from Fine Woodworking Mag today, requesting one of my infeed and an o...
By subscribing to the RSS feed you will be notified when new entries are posted on this blog.
Blog Series
- Burls - 1 part
- Conference table / work bench - 2 parts
- Custom Desk - 1 part
- Custom Floor - 1 part
- Demilune table tops - 2 parts
- Fine Woodworking & Ezee-Feed Review - 1 part
- Fine Woodworking does ezee-feed review - 2 parts
- Fireplace Mantle - 1 part
- General Posts - non woodworking - 1 part
- Homemade Tools - 2 parts
- Jigs - 2 parts
- Living Room and Bar Project - 1 part
- Marquetry - 1 part
- One year already? - 1 part
- Our Shop - 1 part
- Pizza Ovens - 0 parts
- Proud of my Buddy - 1 part
- Router Table - 1 part
- Router Table Fence - 1 part
- Shop Featured on Delta |PorterCable - 2 parts
- Techniques - 1 part
- Vacuum series - 1 part
- Veneering - 3 parts
Your Online Shop - Your Support Is Greatly Appreciated - Your Woodworking Showcase - 3 Ways To Help, Financially - Your Woodworking Community
