| This blog is written by Kevin | 32 entries so far |
-
Baby Furniture #11: Crib in the house
I just thought I’d post some pictures of the crib in its place all decorated. Thank you ...
-
Baby Furniture #10: Final Pics
Well, we are basically finished. There are a couple spots that we still need to put some more Pol...
-
Baby Furniture #9: One Man's Junk contest question
If I don’t get a lot done in the next couple evenings, this will be a mute point I know. Bu...
-
Baby Furniture #8: Inlay complete and most of the Poly is done
My Dad and Grandma came out this weekend. We spent most of the day Saturday looking at baby stuff...
-
Baby Furniture #7: New pieces cut for hardware
Since I changed my mind on the design and had to get new hardware, it only makes since that I wou...
-
Baby Furniture #6: Inlay question - almost done
Sorry, no pictures on this one. I know that is a “no no” in blogs, but I just need a ...
-
Baby Furniture #5: Setbacks/lessons learned/question
Well, I must say this has been a learning experience. Unfortunately I had to make a mistake to...
-
Baby Furniture #4: Ready for hardware
Well, I think we have everything ready for the hardware. Unfortunately, I changed my mind on the ...
-
Baby Furniture #3: Selecting and Preparing Stock
We went through and picked out some lumber last weekend. My dad came out and helped me get all of...
-
Baby Furniture #2: Designing a Crib
I want to send out a special thank you to Randy for sending me a set of plans. But, I chose to...
-
Baby Furniture #1: Baby Furniture Adventure Begins
My wife and I are expecting our first child to be born in the first part of September. I am going...
-
Acquiring new tools #4: Not new, but a 12" Kity Jointer
This is the one I asked about a week or so ago. Finally got some pictures of it last night. 12...
-
Acquiring new tools #3: Grizzly Drill Press
I also got a 16 speed drill press that you can see in this picture.
-
Acquiring new tools #2: Grizzly Planer - PICTURES ADDED
Well, I got it. I bought the 20” Grizzly Planer with the carbide head. Got it home just ...
-
Acquiring new tools #1: Anyone been to or going to the Grizzly Tent Sale this Saturday
I think I will be heading to Springfield, MO on Saturday for the Grizzly Tent Sale. As long as I ...
-
Knotty Pine #5: All done (for now)
I took two days off work and drove back to my Grandpa’s this weekend in an effort to comple...
-
Knotty Pine #4: Anyone want any?
I decided today that I would offer some of the Knotty Pine and Ash up for sale to anyone on Lumbe...
-
Remodel the Shop #3: South wall redesign and Progress Pics
Latest design for South wall This is my design for a cabinet to hold all of my bolts, scre...
-
Knotty Pine #3: Brought home a trailer load today
Here are a few of the boards we have been able to salvage so far. This is probably 1/3 of the Kno...
-
Delta Unisaw #6: Video of it running with/without pulley on
Well I have both a video of the saw with the pulley installed and a video with the pulley pulled ...
-
Remodel the Shop #2: Venting - Why can't you be level
I can’t even discribe to you all how I felt Sunday. I don’t think those words are app...
-
Delta Unisaw #5: Motor update
I ended up having to get the motor worked on. Would have done it myself it I had known it was goi...
-
Delta Unisaw #4: More motor/pulley issues
I finally got around to checking on getting new pulleys. The guy at the electric motor shop told ...
-
Remodel the Shop #1: Initial Sketchup Drawing - ideas welcome
Well, I finally sat down last night night and drew up the shop. This was the first attempt, so...
-
COMPLETE REMODEL OF SHOP!!! - Ideas welcome.
I am going to “try” to do a good job of taking more pictures of my shop remodel than ...
-
Knotty Pine #2: Progress Update and Studs are ASH!!!
I know it’s been a long time since I have updated this blog, but there hasn’t been mu...
-
Delta Unisaw #3: Not so lucky with the age of the saw
I have been suspecting that the guy I bought my saw from did not really know how old it was. The ...
-
Delta Unisaw #2: Got lucky with the motor.
I took the pulley off of the motor tonight and success!!! I tried the nickel test and I would ...
-
My Workshop & Tools #1: My tool collection as of now
It has taken me too long to get pictures of my shop up here and there is so many things to post t...
-
Delta Unisaw #1: Cleaned up and trying to decide if I should keep it.
I have decided to put all of this into a blog instead of the forums. Here is a link to the previo...
-
Home Remodel Projects #1: Past couple projects
OK, so I haven’t been doing a very good job of getting my projects up here. I’m afrai...
-
Knotty Pine #1: Help Please. How do I save it?
This is a cry for help really. I have a house full of old knotty pine tongue & groove wall...
By subscribing to the RSS feed you will be notified when new entries are posted on this blog.
Blog Series
- Acquiring new tools - 4 parts
- Baby Furniture - 11 parts
- Delta Unisaw - 6 parts
- Home Remodel Projects - 1 part
- Knotty Pine - 5 parts
- My Workshop & Tools - 1 part
- Remodel the Shop - 3 parts
Your Online Shop - Your Support Is Greatly Appreciated - Your Woodworking Showcase - 3 Ways To Help, Financially - Your Woodworking Community
