Latest design for South wall
This is my design for a cabinet to hold all of my bolts, screws, and nails.
Progress Pic of it. Bolt bins are in place.
This is my design for a cabinet to hold all of my wood finishes and glues and my wifes paint. (unsupported end screwed to studs)
Progress pics, sorry for all the junk in the way. I had to throw everything out of the middle of the floor in order to fit the triler in overnight.
Workbench is in the background (not for fine woodworking)
Dust collector and air compressor closet
Wood rack. Hopefully I can get some “cheap” metal from work this week. If so, I’m going to change my design to be pipe and angle iron all welded together. The rack will be 25’ long on the West wall, 17’ long on the North wall, and I have convinced my wife that I should put additional wood storage in our attached garage. Not sure on the length yet.
Finally, I have had a couple questions about my design and the large are I left for a stainless steel sink. Here it is along with the heater above it. Cabinets store soap, paper towels, trash bags, and misc cleaning supplies. Water heater underneath. Sorry I didn’t move the planer out of the way first, it is kinda surrounded at the moment.
-- Kevin, Wichita, Kansas
3 comments so far
Kevin
home | projects | blog
284 posts in 498 days
posted 263 days ago
Comments on the design are welcome
-- Kevin, Wichita, Kansas
DaveH
home | projects | blog
275 posts in 318 days
posted 262 days ago
I’d partition off the dust collector from the compressor. I wouldn’t want the dust from the collector getting sucked into or clogging the air inlet of the compressor. Do you have any detail shots on the construction of the pipe wood storage racks? I need to put in some high storage in my shop and your design looks like it may be a possibility.
-- Dave Herron, Boise, ID -- “That which does not crash the browser, makes it stronger”
Kevin
home | projects | blog
284 posts in 498 days
posted 262 days ago
Dave,
I think I have a sketchup drawing of it at home that I can post tonight.
The dust collector & air compressor will be seperated by a movable partition.
-- Kevin, Wichita, Kansas