| This blog is written by Hrolfr | 11 entries so far |
-
Cross for my Father In Law #5: Success!!!
Well after having bought a new router and a good bit….. No problems on the fresh cut out cr...
-
Cross for my Father In Law #4: Attempted save but ultimately a learning step
SO I attempted to fix the mahogany cross in some of the ways you have all sugested and some may h...
-
Cross for my Father In Law #3: Failure
Ok so I attempted to route the Mahogany cross and the router and myself really chewed up the wood...
-
Cross for my Father In Law #2: Mahogany Cross cut out
As the title says I cut out set the thickness of the mahogany Cross. I decided on Mahogany than...
-
Cross for my Father In Law #1: Rough design and prototype
My Father- in- law is coming to vist next weekend from Vermont, he is a 4th Degree Knight of Col...
-
Bandsaw Adventure #6: All Together now
The bandsaw is completely together with the miter and fence holder… the Fince holder is not...
-
Bandsaw Adventure #5: Set-up
I unboxed the saw an with help from my father on Sunday got the saw body attached and the riser b...
-
Bandsaw Adventure #4: Update - Really good news
Well I decided (read the wife decided) that I had waited long enough and that the bandsaw should ...
-
Bandsaw Adventure #3: Update - No good news
I called woodcraft last Friday as it was 3 weeks after the order was to be put in for the new bas...
-
Bandsaw Adventure #2: Update
Ok so I got off the phone with Woodcraft…. they said no problem… the manager was plac...
-
Bandsaw Adventure #1: 1st attempt at the new bandsaw
So I am pretty new at this woodworking thing and am just now acquiring tools. I have already pic...
By subscribing to the RSS feed you will be notified when new entries are posted on this blog.
Blog Series
Your Online Shop - Your Support Is Greatly Appreciated - Your Woodworking Showcase - 3 Ways To Help, Financially - Your Woodworking Community
