more simple carving 2
Carving the curved letter section begins with the stop cut. I use a out cannel gouge that is close to the radius that has been layed out. If you don’t have an gouge close, you can work you centers down with a parting tool, or you can use the corner of your bench chisel to work carefully around the curve. when using your bench chisel, be aware of how deep your actualy cutting, just like before you can always clean up alittle deeper.I will try and work the curves in 1/4 sections (90 degrees) turning the piece as needed to keep cutting downhill where possible. Now you won’t always be able to cut with the grain, but keeping your chisels SHARP and not trying to pop you chips up wil...
