| Blog series by GaryK | updated 86 days ago | 2 parts | 578 reads | 35 comments total |
Part 1: The need for change
For some reason I have had a problem lately with the bags on my dust collector (DC) coming off during use.Needless to say it made quite a mess. It seemed that I couldn’t get the cloth belts that held the bagson any tighter. My first thought was to get a canister as a retrofit, but about 10 years ago the DC Ibought was a generic brand. A Reliant. So nothing I found would fit it. Here’s my current system: So I figured that I needed to look into a better system for attachin...
Part 2: The final solution - completed.
Well, this is the second and final part of my dust collector retro-fit. Here you can see the two boxed as I recieved them:.. Here they are unpacked and stacked. I removed the Dust Dog label. I figured that it didn’t do anything but restrict air flow. It came off easily.. Here you can see the handle that created some confusion in the first part of this blog... As the handle is rotated it makes these “paddles” brush against the pleats of the filterknocking off the ...
By subscribing to the RSS feed you will be notified when new entries are posted on this blog.
Blog Series
- Dust Collector - 2 parts
- Hand made Plane - 2 parts
- Harpsichord - 3 parts
Your Online Shop - Your Support Is Greatly Appreciated - Your Woodworking Showcase - 3 Ways To Help, Financially - Your Woodworking Community
