The Router Table Saga #7: Completed! Now for improvements....

Found this at Rockler http://www.rockler.com/product.cfm?page=17401&filter=switch

And this at Woodcraft http://www.woodcraft.com/search/search.aspx?query=switch

Lew

Mark, Here are a few examples…

http://www.highlandwoodworking.com/index.asp?PageAction=VIEWPROD&ProdID=1888

http://www.woodpeck.com/elecswitch.html

http://www.timbecon.com.au/products/router-tables-accessories-451_0.aspx

Or, you can do like I did. I made a switch from household electrical parts. Box, cover, switch and an extension cord. Cut the cord about 2 feet from female end and within the box, wire in switch. Screw to router table (or inset in side) and secure cover on box. Plug into outlet and plug in the router and voila!

Tom

-- Anybody can become a woodworker, but only a Craftsman can hide his mistakes.

hello Mark, I felt in the same position when I completed my router tabel as well. Not near the quality of the work I have seen here but it works well and the plate is home made and lifts out of the table if needed. I did go and buy that Rockler foot peddle switch. It is suppose to arrive Wed (July, 9th) and I look forward to it. Like you I didn’t want to go and have ro reach under the table every time I wanted to start and stop the tool.

-- Jerry, Measure 10 times cut once. Set in the foothills of the Smokey's

Thanks Lew, Tom and Sac,

I should have waited for your responses before I went to the local HD. I’m following your path Tom with the various electrical bits. My brother is an electrical engineer so I checked with him as to what is safe before I started trolling through the parts at HD. Actually the sales fellow there was really helpful and actually helped me save money! I was impressed. Any way I bought a switched plug some extension cord wire and a male plug end (I already have an all-weather box to keep dust out). I am hoping to wire that up today and mount it. I am wondering how the softstart on the Triton router will be affected by the power being switched at that plug not by the router’s switch.

I noticed elsewhere on these forums rather strong arguments against a footpedal switch for the router which is why I didn’t go that route (it was my original plan to use a foot switch). Sac, I’d be interested in your results with the Rockler switch.

-- ....next big purchase is wood for the next project, Mark

I am a bit late, but Grizzly has a great selection of switches.

-- //FC - Round Rock, TX - "Experience is what you get just after you need it"

sIKE, thans for the link.

-- ....next big purchase is wood for the next project, Mark