Cutting Board Learning #2: Making Progress
BEFORE I START, IF YOU READ THIS, AND CAN OFFER ADVICE, I’D LOVE TO HEAR IT. THANKS IN ADVANCE!!!!! Ok, after collecting information from a couple key people, and looking carefully at my pieces, I’ve moved on to Sample #2. First things first. NEW CLAMPS!!!!! Not the best, but all I could get for now. On to business. More blanks, 10 this time. For these, I used a sanding block and norton 3x sandpaper. This was slow, but quiet as it was about 9:00PM when I started, and I’m in my apartment. So, i made about 50-60 passes on each side with 60 grit, adding more to clear up deeper scratches, etc… then moved on to about 30 passes per side with 150, then onto about 15...
