CutNRun's Blog

Older Entries

• Wood Scrap Box #3: One more slight adjustment - 159 days ago | 7 comments

  Well, the jewelry box is assembled and now complete. I assembled everything and did one final tr...

• Wood Scrap Box #2: Measure twice, cut once - 164 days ago | 7 comments

  I actually measured very carefully three times; the bottom of the dado would be precisely 3 15/16...

• Wood Scrap Box #1: Parts and Pieces - 170 days ago | 4 comments

  Two days before Christmas, my wife casually mentions that she would like a jewelry box. Hmmm, do...

• Tool cabinet #7: Top mounted tool chest - 170 days ago | 9 comments

  While it isn’t quite done, I’m about 80% complete with the companion chest to my tool...

• 2 x 4 Project #1: A one entry blog - 179 days ago | 13 comments

  Yesterday, I posted a taper jig project. The taper jig was used in my entry for the 2×4 Pro...

• Tool cabinet #6: Almost ready for tools - 211 days ago | 3 comments

  The tool cabinet is all together and has three coats of Minwax Wipe On Poly applied. All that re...

• Tool cabinet #5: Another delay - 218 days ago | 3 comments

  While completing the tool cabinet, I have also been working on a quick and dirty cabinet to mount...

• Tool cabinet #4: Getting it all together - 222 days ago | 7 comments

  I was able to spend some time in the shop over the holiday and finished getting the tool cabinet ...

• Tool cabinet #3: Installing doors and drawers - 227 days ago | 5 comments

  With purchase of the new tablesaw, I had to install a 240V outlet. I took the opportunity to add...

• Tool cabinet #2: A break in progress - 230 days ago | 9 comments

  I didn’t make any headway on my cabinet today, but did make progress on my shop equipment. ...

View all 12 entries »