General Topics #7: Bookcase to Compliment my MCAD Project

Great design. Good luck. I don’t know if it made it though. I’m not sure of the time one 4/20 that Martin was going to collect them.

-- Karson Southern Delaware karson_morrison@bigfoot.com

I guess that’ll be my own fault then. Geez, I sure should learn to read a clock…

Thanks for the compliment and good luck to you as well Karson.

-- Jeff, St. Paul, MN

Well, like Karson says, I may have been close to the ‘cut off’. Regardless, this bookcase will hopefully see the light of day because it is a cool complimentary piece to the desk I designed and built in my continuing studies furniture class in February through March earlier this year.

This piece calls upon a major element in the desk design. The desk is a full cantilever and the main ‘leg’ of that design drove this bookcase concept. My design is more of a cabinet as the shelves are behind drop-down doors and there is an extra compartment on the left side that can be used for whatever I see fit. Oversized coffee table books, games (most likely), rolled up maps (maybe). The ‘base’ of my desk is relatively substantial and I wanted a case that would both look substantial as well as be stout enough to hold my library of hard-bound woodworking books as well as many magazines KT and I have.

Here are few shots from the SketchUp file for the desk. The first one is an end shot looking directly at the support for the top and the main inspiration for the atypical shape of the bookcase.

This image is Front View shot. Note the angle on the outside of the support (roughly 12 degrees) is the same as slope of the front of the bookcase.

Here is a side shot of the bookcase.

The SU model for the desk was literally the starting point for the bookcase. I imported the component into a new file and went to work. I wanted the case to have drop-front doors for the shelf portion because we have some Barrister style cases and I like those. However, I think glass fronts would dilute the simple shape and being able to see the books would clutter things. Thus, the drop-front door solution. I struggled quite a long time with that aspect of the design. I wanted an almost seamless front but that just isn’t possible (or it’s beyond my ability to grasp) without using clunky euro-style hinges. These hinges will be used on the vertical door but they are not what I wanted for the shelves. So, the drop-front doors will be hinged on the inside with a piano hinge or possibly 3 nice heavy gauge hinges for the sake of strength. If I’m going to have the drop-front in the design, I should be able to set a stack of books on them without their weight overly stressing the case. Function.

The darker tone you see on the front of the carcase is to add some visual interest since I can’t have an almost seamless front. The desk is Mahogany and this case will be as well. I designed the carcase with stopped rabbets to add some strength but the seams still need covered on the front and top. The face frame will be thin veneer that will be dyed several shades lighter than the rest of the piece and the feet will get the same treatment. The contrast in the SU file is actually greater than what I envision for the finished work.

As for the three compartments, the top and shallowest has an an adjustable shelf. We can put smaller books, paperbacks and other odd shaped items in there. The middle compartment is designed with an adjustable shelf as well but it won’t likely get used. The bottom is deep enough to hold those baskets or boxes that often get used like mini filing cabinets. Depending on how the books we choose to store in the case fit, I hope to use that bottom area like a filing cabinet. We shall see.

Here are some other shots I exported from the SU file.

Detail showing the tight tolerance of the compartment doors. The swing of the door does actually clear the top other door ever so slightly.

I forgot to mention the absence of hardware is intentional. Small finger recesses will be put into the top edges of each of the doors and on the outside edge of the vertical door.

Thanks for taking a look and please offer and critique or feedback you like.

-- Jeff, St. Paul, MN

it should be really cool. I look forward to seeing the finished one

-- making sawdust....

Hi Jeff,

This is an interesting design. And I like the absence of hardware.

This will be a nice project to build.

Thanks for the post.

-- With God's help all things are possible- even woodworking. Woodworking is not just a hobby, it is an (expletive deleted) expensive hobby.

Hi Jeff,

A very attractive looking design.

I admire your use of SketchUp.

I finally spent some time trying out SketchUp the last couple of days,

but I couldn’t quite finish a drawing in time for the contest.

Good Luck!!!

-- -** You are never to old to set another goal or to dream a new dream ****************** Dick, & Barb Cain, Hibbing, MN. http://www.woodcarvingillustrated.com/gallery/member.php?uid=3627&protype=1

I should have my wife come to look at some of the contest entries. Yours would be just about the first I would show her. She’s also one to strike some balance between form and function.

-- FloridaNoCypress