Well, I have three flood lights (but no bulbs yet) and one two-tube flourescent. Finally I have electricity! I have found that if I start working out there at about 10 in the morning, by 2 in the afternoon, I have to take a break to rest my back. Then after supper, I’m ready to get back to work. So far I have made a “scooter” to help me get all the heavy stuff out there. I’m going to tackle the drill press and maybe the lathe tonight.
How glorious it will be to see them actually in my brand new shop. I have the cyclone out there (in pieces) and Mike and I are going to put it up this weekend. The motor came without a cord, so I will have to purchase one. The electrician and I wanted to take a gander at the plug for this 230V monster, but alas, for a thousand bucks you get all but the plug!
There’s still some trouble with the final inspection. It appears that the city powers do not have a code for the sliding door which I have. Soooooo, we will have to remove the door and install an overhead garage type door to get the final inspection approval. However, I do not promise not to sneek my original door back on as soon as the inspector is gone! Anyway, that door and the trim are all that remains (and the inspection). I can’t put up any insulation or cover the walls until the inspection, but there is plenty to do just to move all the machinery into the shop. I’m taking it slowly, because I don’t want to strain or sprain any muscles, and that’s alright with me….......now that I’m finally in my shop! I’ll take some pics after I get kinda set up. It will be a while before I get all the furniture built.
-- Forget the health food, I need all the preservatives I can get !
12 comments so far
Todd A. Clippinger
home | projects | blog
2538 posts in 579 days
posted 319 days ago
This has been a favorite of mine to follow. It’s just so exciting!
-- Todd A. Clippinger, Montana, http://amcraftsman.com
Brad_Nailor
home | projects | blog
725 posts in 437 days
posted 319 days ago
This is great..but I am jonesing for PICTURES! ;@)
-- Women love me.....trees fear me
Todd A. Clippinger
home | projects | blog
2538 posts in 579 days
posted 319 days ago
Yeah, I was hoping for pictures too. I went over to the projects to see if there were any, no luck.
-- Todd A. Clippinger, Montana, http://amcraftsman.com
Alan Robertson
home | projects | blog
13 posts in 398 days
posted 319 days ago
Concerning your door, see if you can sign a waiver or some type of release for them. They have a little problem accepting responsibility should they accept your door if it hasn’t a “Made in China” sticker on it. Remind them that it is an out building ( pardon the term ), not a residence. They may want hooks or latches at the bottom corners to hold it tight in a blow. I have sliders on several of my buildings but I did not have to deal with the – WE KNOW WHAT’S BEST FOR YOU PEOPLE. Have dealt with them on remodel jobs and sometimes a signed waiver was needed. Hate to see you waste money on a temporary door when you could waste it on more tools. If memory serves, what type of door do hangers have? If you have a problem, close it in. Painted plywood on the outside, painted osb on the inside. Change it when you are ready and they are gone. I’m off my pedestal. Good luck. Al
-- MrAl
Thos. Angle
home | projects | blog
3244 posts in 442 days
posted 319 days ago
Yeah, dang, no pictures. Makes me mopey and blue. Just dieing to see what is going on.
-- Thos. Angle, Owyhee Design, Oregon
Chip
home | projects | blog
1058 posts in 572 days
posted 319 days ago
Even though you lament the time this shop has taken to build, I think it’s gone by at a wonderful pace. But I do understand the anticipation factor. This has been great to follow and by the way…
pictures, we need pictures ;-)
-- Better to say nothing and be thought the fool... then to speak and erase all doubt.
miles125
home | projects | blog
920 posts in 486 days
posted 319 days ago
Hey you cant actually finish the inside walls of this shop and show us all up! Thats just sacreligious to go ahead and completely complete a shop!
Good luck gettin ya stuff in anywayz :-)
-- miles125, Alabama.."Architecture is frozen music""
Karson
home | projects | blog
12879 posts in 880 days
posted 319 days ago
Congratulations Cal. Keep it coming.
-- Karson Southern Delaware karson_morrison@bigfoot.com
Myron Wooley
home | projects | blog
165 posts in 376 days
posted 319 days ago
Calgirl-
I hardwired my cyclone motor into a contactor that is powered by a 3-way 120VAC circuit. The contactor is inside a small NEMA box, and one switch is next to it, and the other is by the door. The 220VAC is on a dedicated 30A circuit.
I think I would put it on a heavy-duty remote control if I did it over.
Congratulations!
-- Furniture Medic- the prescription for damaged furniture
Todd A. Clippinger
home | projects | blog
2538 posts in 579 days
posted 318 days ago
You can only partially finish the walls or you will be ejected from the LJ group!
-- Todd A. Clippinger, Montana, http://amcraftsman.com
Myron Wooley
home | projects | blog
165 posts in 376 days
posted 318 days ago
OK, I’ll be packing my bags now <sniff>. I committed the sin of completely finishing the walls, even putting baseboard down and ceiling fans up. I even put stainless steel switch and outlet plates on the walls. I am a bad bad LumberJock! (and I’m not really leaving)
Go for it, Cal Girl! This is the only time you’ll ever have to make your Girl Cave as perfect as you want- don’t listen to these bare stud galoots! ;)
-- Furniture Medic- the prescription for damaged furniture
cajunpen
home | projects | blog
5352 posts in 546 days
posted 318 days ago
Calgirl, I hope the envy doesn’t show – but I am jealous AND very happy for you.
-- Bill - "Suit yourself and let the rest be pleased." http://www.cajunpen.com/