I am working on a writing desk. After seeing John Frys cool ebonized and glided chair
( http://lumberjocks.com/projects/7749 )
I decided to add some gilding to project using Sepp Mica Powders.
I started by gilding these applied carving pieces. I mixed the powder with Seal Coat and brushed it on.
I applied two coats letting the shellac base dry in between coats.
I was somewhat concerned that subsequent coats would dissolve the previous layer but I was please to find that these powers fill in quite readily. It is a matter of mixing the desired concentration. I have gone for a rather heavy mixture….
After playing around with the carvings I moved onto the legs. I taped off the areas that border the designated gilding segments-
I removed the tape and began applying a stain to the remaining areas. I am giving this a wash of a red mahogany stain.
I applied the stain with a small artists brush-being very careful to let the stain ease up to the gilded borders…I was happy to find out though that even if a good deal of stain washed over the gilded segments-the stain did not penetrate those areas. A paper towel or rag removed any stain on the gilded areas.
Here are the legs set into the case and the desk.
The glided drawer casing is glued in place. The other gilded carvings are taped on for now.
It’s a challenge to gild enough but not too much in a busy piece like this. The top will have profile that closely follows the perimeter of the casework-in other words I plan on just enough overhang or lip to allow for wood movement. The top will have a a fairly “busy” profile routed along it’s edge and that edge will receive a gilding as well.
Thanks for looking…
Alan
7 comments so far
Woodhacker
home | projects | blog
507 posts in 205 days
posted 86 days ago
Alan, that’s really interesting I’ve never tried gilding, (or for that matter a project that would lend itself to gilding) but this adds a great touch. It’s obvious this is going to be a beautiful writing desk…can’t wait to see it completed.
Thanks for posting this.
-- Martin, Kansas
HokieMojo
home | projects | blog
330 posts in 210 days
posted 86 days ago
You are doing some great work. IT seems to me that the gilding really brings out the accents in a complex piece. I’m still a long way from accentuating details like you have, but its great to see someone else doing something so cool. keep up the great work!
EdC
home | projects | blog
420 posts in 322 days
posted 84 days ago
Wow
What is this style called?
Where did you get the design or the design idea’s from?
-- Ed Collinge- Edmonds, WA.
Bob #2
home | projects | blog
1944 posts in 503 days
posted 84 days ago
This is a very interesting pice of work.
Is it your own design or did you follow a plan?
Tell us more about the fluting.
Bob
-- A mind, like a home, is furnished by its owner
Alan Young
home | projects | blog
38 posts in 202 days
posted 84 days ago
Thanks for all the comments and questions…..
Here are some answers…..
The design is my own. It isn’t a reproduction but is a style that is reflective of older period furnishings.
I designed this desk around the two double curved corner panels. These panels were left over from a cabinet I designed and built a year ago:
http://www.woodwardwoodworks.com/CurvedCornerCabinet.html
The inspiration for the desk is a somewhat different matter. My wife was watching a movie and said
I should come and see the cool old furniture in the various scenes. I walked into the room and started watching. Indeed the settings were full of marvelous period furniture. The movie turned out to be the Jane Austen story Sense and Sensibility. I proceeded to watch the entire Austen series on PBS and decided it would be a great challenge to design and build a piece that could “fit in” one of those stories. So this desk is designed as “Mr. Darcy’s Writing Desk”,and to make a short story long I have been documenting the entire piece on my website.
http://www.woodwardwoodworks.com/MrDarcysWritingDesk.html
Now about the Fluting on the legs. I entered this blog sometime back: It has some details and a link to many pictures of the jig I built.
http://lumberjocks.com/jocks/AlanY/blog/4559
I’ll post pictures of this when it’s all finished.
Alan
John Fry
home | projects | blog
75 posts in 182 days
posted 83 days ago
That is looking great Alan!
Now I see where you are going with this. This is going to be an awesome piece and I can’t wait to see the top and the finished piece.
-- John, Chisel and Bit Custom Crafted Furniture, www.chiselandbit.com
jeanmarc
home | projects | blog
1752 posts in 198 days
posted 71 days ago
très belle pièce .ne trouve t on pas ses décorations peinte en laitons .je pense que sa donnerai un notre cachet
a ce beau bureau
.tres beau travail
-- jeanmarc manosque france