LumberJocks

Josh's Blog

  • Advertise with us
This blog is written by Josh | 3 entries so far

Latest Entry

Table Saw/Router Work Station #3: Table Saw In Place with Hardboard Top

03-18-2010 06:14 PM by Josh | 7 comments »

After receiving some very awesome feedback from a few people on this site I’ve gone forward with the project by screwing a 3/4” piece of ply to the stop and then putting a 1/8” piece of hardboard on top of that. I then went ahead and routed slots for the t-track which will hold the fence I’m working on. I’ve got a cutout for my router (not attached yet) and then I continued the 5/8” miter slots that are on my Craftsman TS. I also raised the saw blade through the hardboard and am using that as my zero clearance insert. I countersunk screws into the hardboard to attach it to the plywood so that if and when they get banged up I can just switch them out wit...

Read this entry »

Older Entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase