LumberJocks

ClearVue Cyclone Installation

  • Advertise with us
Blog series by jmos updated 09-24-2012 08:40 PM 2 parts 10038 reads 10 comments total

Part 1: ClearVue Cyclone Installation

09-24-2012 07:51 PM by jmos | 0 comments »

Since I started woodworking about 2 years ago I’ve been using a Powermatic canister dust collector along with a overhead air filtration unit for dust control in my basement shop. It did a nice job of chip collection. But, after a while I noticed there was always a layer a fine dust all over the shop. After a while I did some searching and found Bill Pentz’s site on dust control, and decided I should try to upgrade the filter cartridge on my DC, so I bought a Nano filter from ...

Read this entry »


Part 2: Cyclone and Piping

09-24-2012 08:40 PM by jmos | 10 comments »

Cyclone – The cyclone itself wasn’t too tough to assemble. I do have to admit I would not have minded if the unit had a little less of the erector set feel to it. Everything was well made and solid. All the parts were there. The direction are good, and available online if you really want more detail. I didn’t take step by step photos as they are already included in the directions. I contacted ClearVue a couple of time during the build and the they were great to work wi...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase