Like the title stated this last part of the build involved a lot of lamination! The entire bench top is made out laminated 3/4″ material, the bench is about 16″ wide. This meant that there where about 20 individual boards that need to be laminated together to get the 16″ width I was looking for. The best way to tackle this lamination process was in several stages. I wanted to make sure that each initial section was less than 6″ wide, this way I could run them across the jointer and planer after the first glue up. I wanted to try to stack the cards in my favor as much as possible in order to end up with as close to flat surface as I possibly could. Click here to check out the pictures!