jm64's Blog

  • Advertise with us
This blog is written by jm64 | 1 entry so far

Latest Entry

Workshop Addition: Jet AFS-1000B Air Cleaner

02-18-2011 03:03 PM by jm64 | 13 comments »

Dust collection in my shop is limited to my shop vac set up with a hepa filter. If I need to do anything that kicks up a lot of dust, I roll the tools out in the yard and work there. There are a few operations that aren’t convenient to do outside. First, my Mitre Saw is most easily used in place. I use a controller to turn on the vac when I’m using the saw. It collects some of the dust but a lot of it goes all over. Also, when I’m sanding a project between coats of finish there is some dust that is hard to collect. I ordered the Jet AFS-1000B from Amazon for $280. It arrived in good condition. I read through the manual, but there isn’t much to set up. ...

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics