LumberJocks

jeffl's Blog

  • Advertise with us
This blog is written by jeffl | 7 entries so far

Latest Entry

bead sander bugs #1: working out kinks

01-07-2012 11:08 PM by jeffl | 5 comments »

If this comes out right the first picture is the plywood disc glued and screwed to the pulley. After running for several hours the disc came unglued so I drilled and tapped the pulley. The second picture is another view of the pulley and disc. This next picture shows the screws counter sunk through the Velcro. I included a picture of the single screw that keeps the bucket from turning. I had to put tape on the lid to keep it on. I found this out when I went to check on the beads and the beads were all over the floor. I included a picture of the beads after a 80 grit,120 grit and 220 grit. The last picture shows the beads with a beeswax and orange oil Polish. This on...

Read this entry »

Older Entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase