LumberJocks

jeffbranch's Blog

  • Advertise with us
This blog is written by jeffbranch | 11 entries so far

Latest Entry

New Router Table #7: Almost Finished

09-25-2013 10:29 PM by jeffbranch | 2 comments »

Working on the back of my router table. The end is in sight. With the completion of the router table top and the fence, I am down to the final items before I can call this project finished. My punch list contains these items… - Complete the back- Mount the router- Install the power switch- Enclose the router area Complete the BackThis step involves adding a clamp which will latch onto the right wing of my table saw. I also need to plug the screw holes and paint the back. The illustration below shows the clamp setup… The design for the router back clamp. The clamp will have a spacer strip which is slightly thinner than the edge on the right wing of the table saw. The clamp b...

Read this entry »

Older Entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase