LumberJocks

jeff_wenz's Blog

  • Advertise with us
This blog is written by jeff_wenz | 4 entries so far

Latest Entry

"Fold up" ironing board (reverse engineering) #4: Other important details

1423 days ago by jeff_wenz | 4 comments »

So some important details I have not mentioned yet. The routed groove: There is 2 ½” inches from the front of the case to the groove. The top of the groove bends in ½” Heat Shields:Use aluminum for protection. I purchased a 24×6” piece and cut it in half. I sprayed it with white epoxy appliance spray paint then mounted it with 3M’s Super 77 spray adhesive. Shelf:Install in coordination with your heat shields. This put my shelf 12” down from the top. Electrical Unit:If you decide to use this, install it as far right as possible. I left about an inch space to the right, but now our iron is a tight fit on the left when in storage. Also, the electrical line c...

Read this entry »

Older Entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase