LumberJocks

Living Room #3: TV Stand update

  • Advertise with us
Blog entry by Jason W. Fudge posted 07-24-2013 08:54 AM 638 reads 0 times favorited 1 comment Add to Favorites Watch
« Part 2: TV Stand... the concept. Part 3 of Living Room series no next part

After getting home pretty late today I finished putting the last bits of trim on my tv stand and sanded it down to 320. Im planning on taking it to 1000 but I might not. The wood is wenge for the trim and sides and the tops are acacia flooring.

What are your thought for the finish?



1 comment so far

View HerbC's profile

HerbC

1213 posts in 1607 days


#1 posted 07-24-2013 01:39 PM

Most experts I’ve read indicate that sanding the wood to too high a grit will actually produce a worse finish. The tend to recommend stopping the initial sanding @ anywhere from 150 to 320 grit. The higher grits are used to knock defects out of the finish coat(s) and to polish the finish surface to the desired level of smoothness and sheen.

Herb

-- Herb, Florida - Here's why I close most messages with "Be Careful!" http://lumberjocks.com/HerbC/blog/17090

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase