LumberJocks

jcoulam's Favorites

  • Advertise with us
View lew's profile

Kitchen Treasures #1 Making the Celtic Knot Rolling Pin #3: Making the Saw Cuts For the Strips

2126 days ago by lew | 3 comments »

Once the blank has the layout lines drawn, it is time to cut the slots for the ellipses. The first step is to set the blade height. When the cut is made, there should be about 1/8” of material left holding the two sides together. This really aids in the glue up by keeping the pieces aligned. Set the blank on the jig and adjust the angle and the end stop so that the front SHORTER layout line is positioned to the LEFT side of the blade cut. Orientation is when you are standin...

Read this entry »


View WoodMosaics's profile

Making Wood Quilt Blocks

2098 days ago by WoodMosaics | 16 comments »

First of all you have to determine what shape you will need that you can make accurately and repeatedly. This is where my jigs come in. I was to poor to buy several miter gauges so I made mine out of angle iron and bar stock. I made them set close to a certain angle, adjustable just a little. This first picture shows the back side of one of my jigs on the saw. This one is set at 45° like 4 of my jigs are; (Now on any of these pictures if you want to see something closer just click on t...

Read this entry »


View lew's profile

Kitchen Treasures #1 Making the Celtic Knot Rolling Pin #1: The Jigs

2128 days ago by lew | 10 comments »

I have had so many positive comments and feedback on the Celtic Knot Rolling Pin. Thank you for all of them. Many LumberJocks asked for instructions on how they are made- so here goes. I am a fan of “Cook Book” style instructions so if I miss any details, please let me know and I will try to flesh them out. I thought it best to start with the jigs I used to prepare the turning blanks. Please note that I always over engineer everything and hardly ever see the obvious or the easy...

Read this entry »


View iltws2's profile

Making a Texas Star

930 days ago by iltws2 | 17 comments »

I would like to start out by saying the projects listed on this site really show some of the best talent and creativeminds ever amassed on one website. Makes me jealous. Any way I have been asked to show how I make a Texas Star, so I decided to share this with everyone. There are a few things you need to make before starting. First thing is to make a pattern making fence for your table saw. It is real simple. I usually make mine 4-6 inches wide out of 3/4”plywood. Rip a scrap piece o...

Read this entry »


View McLeanVA's profile

Cutting Board: How To's #1: Zig Zag Cutting Board - How To:

1397 days ago by McLeanVA | 50 comments »

For those of you who asked me for a tutorial on how to make the zig zag legless vegetable death table (cutting board), here is my best shot. I am far too impatient to take photos when I work, so I decided to illustrate the process using some good old Adobe PhotoShop. I hope you find this useful and informative. I will outline the process in 10 steps below. I have assumed that when viewing these steps that basic woodworking skills are familiar to you. If you have questions, or run into snag...

Read this entry »


View degoose's profile

How to make a endgrain tumbling block butcher block board!

1815 days ago by degoose | 48 comments »

Hi guys ,, I had a request to make a tutorial with regards the endgrain Tumbling Block Design.First off,.., You need to decide the size of the blocks…. for this example I used 1” stock… Or something similar.. actually just over .. once dressed. Set the blade of the table saw to 60 degrees.. a bevel box makes this simpleI use the INCRA fence system so it is easy to rip bevels off side of the blade.Once the bevels are ripped measure the length of the bevel and move the f...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase