my first blog ever/ how I made the round box.
Due to popular demand I’m attempting my very first blog for those who wanted to see how I put together my round box. I’ve had a couple of 30” sections of a column left over from a remodeling job I did over 10 yrs. ago. I always knew I’d find a use for them. First step is to rip them in half. I’d recommend a sled or an extra rail on the table saw to ensure straight cuts. They’re too thick and need to be thinned down. The best way I’ve found to do this is to use your table saw as a planer. I didn’t figure this out until after I had used a hand held circular saw on the first one. Had to remove the base to get enough depth and make about 50 plunge cuts every ¼ inch then remove what’s lef...
