LumberJocks

jadams's Blog

  • Advertise with us
This blog is written by jadams | 1 entry so far

Latest Entry

Inversions cutting board tutorial

1043 days ago by jadams | 11 comments »

In response to some questions about how this pattern is made… I’m not sure if this is the only method, but here’s how I did it. Here’s the original project I posted: http://lumberjocks.com/projects/53452 Hint: When you look at the board, long ways going left to right, every row is a different size, but every group of 2 rows are all the same size! Solution: First you rip strips like you would for a regular end grain board, but in a progression of widths from largest to smallest in pairs (one light one dark). The height of the strips needs to be the largest width + the smallest width + at least 1/8 inch. I made a really simple thin strip jig for the table ...

Read this entry »


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase