LumberJocks

Church pews project #7: Dining table top and legs

  • Advertise with us
Blog entry by inchanga posted 542 days ago 1410 reads 0 times favorited 0 comments Add to Favorites Watch
« Part 6: Dining table start Part 7 of Church pews project series Part 8: Assembling the base »

The dining table top has been taken out of clamps, sanded and the first coat of finish applied. The pictures show the underneath of the top ready for finishing and after finishing with two coats of lacquer and a coat of wax applied.

The upper side of the top was sanded to 240 grit and is shown after one coat of laquer.

I have reverted back to a lacquer finish because in appearance it is as good as the oil finish and it dries much faster.

The table legs have also been ganged up for laminating and clamped overnight. They are now ready for cutting to length, planing, sanding and finishing.

Tomorrow should see the table top and legs completed.

-- chris, north wales http://salemchapelfurniture.co.uk/



0 comments so far

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase