hvroberts's Blog

  • Advertise with us
This blog is written by hvroberts | 2 entries so far

Latest Entry

Lathe Centers #1: Sears Lathes

06-03-2010 05:16 AM by hvroberts | 7 comments »

This past winter I was trying to build up my tool supply for my shop. (This is Maine and my shop has no heat) I found an add for a lathe on Craigslist. It was in my old stomping grounds about 50 miles north where I spent the first 19 years of life. To make the story short, I bought the lathe. (When they ask $40. for a lathe, you don’t try to dicker the price). Upon setting this up I noticed that the head stock center looked as if it had been beaten with a hammer. I took out the Dremmel tool and ground off the teeth where they were round over. I went to Sears with the Model # and looked it up in their system only to be told that they do not make parts for this lathe any more. Now, a...

Read this entry »

Older Entries

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics