hunter71's Favorites

  • Advertise with us
View htl's profile

Toy Construction #158: New Wheel Making Jig #2 For Angled Treads

10-21-2017 01:04 AM by htl | 7 comments »

After posting my last wheel making jig Duchy posted. A nice jig, not that sophisticated as Ducky s one, but perfect for his task. Great idea of that saw blade. How about tractor wheels? - Dutchy Here's the first wheel jig blog..Well here’s another jig pretty close to the other straight tread jig but able to be moved around for different angle treads. I make a lot more straight treads so will leave the first jig on the wall and build a new one. Here’s a picture of the t...

Read this entry »

View htl's profile

Toy Construction #60: Tires for the tanker truck 1&2

06-13-2016 11:20 PM by htl | 7 comments »

The tires will be something like these but much simpler treads.They will be much thinner to fit the truck. Going to experiment with some cheap new hole saws and see if I can make some truck tires for my latest project.This is an 18 hole saw set for $16 so way cheap and light duty.From Harbor Freight.The main thing I’m after here is the large choice of hole sizes for making tires.3/4 In – 5 In Carbon Steel Hole Saw Set 18 Pc When I sho...

Read this entry »

View KoryK's profile

Intarsia Basics #6: We are Almost There!!

06-25-2012 01:00 AM by KoryK | 14 comments »

Welcome back and again sorry for taking so long to get this post out. After my hand healed I was really backed up on some other projects. I’m almost caught up and will post some of those projects on my page in the next couple of days. When we left off we had all the sanding done and are ready for staining and finishing. I’m making two of these frogs, one that will need staining and one out of exotic wood so everyone can participate in this project. We will go over staining next. I’m...

Read this entry »

View 559dustdesigns's profile

Router Table Cabinet

09-24-2009 11:06 AM by 559dustdesigns | 26 comments »

This is a router table I’m working on for my shop. I was able to incorporate most the features I needed and plan to use it often. It isn’t finished but most the major parts are in place. I purchased the Incra twin linear, router table top, woodpeckers router lift and the porter cable 7518 motor from Woodpeckers Inc back in 2002 or 2003. Finally, she’s in working order. Since the last post I was able to complete the rear ...

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics