LumberJocks

huff's Favorites

  • Advertise with us
View BobAnderton's profile

A slight variation on Shipwright hinges

07-23-2014 02:18 AM by BobAnderton | 6 comments »

Shipwright showed how to make these cool integral wooden hinges for a box in this tutorial. http://lumberjocks.com/shipwright/blog/23989 I liked them a lot but it required planning ahead and cutting the hinge features in the back of the box before assembly. I wanted to be able to assemble a box and cut the lid off with the tablesaw and have the choice of making an integral hinge or using brass hinges later so I developed this slight variation. An example of the finished hinge is this pro...

Read this entry »


View patron's profile

tutorial #1: RIBBONS ANYONE ?

07-15-2012 03:59 AM by patron | 55 comments »

i been back to the shop more recentlymaking some giftsand in the process of making some accents for themthought you might like to know how to do it this is the ready parts to be used for thatand how i made them i start by selecting the woods that have some contrast to each otherand are different than the background they will be inall the same size and with double tape on both ends(make them wider and thicker than the finished partor the processes will eat up your wood) laying them on...

Read this entry »


View ScottMorrison's profile

Marketing your wodworking

03-01-2011 01:49 AM by ScottMorrison | 1 comment »

Hi everyone. For the past year or so, I have been receiving emails from my woodworking friends asking when I would be finished with the book I was writing on marketing for woodworkers. Okay, so it took WAY longer than I thought, but I finally have my eBook (PDF) ready and available. It was quite a project. You can read about it by going to my website. I can’t thank everyone enough for your seemingly infinite patience, nor apologize enough for spending too much time fly fishin...

Read this entry »


View Div's profile

CS1 Spaghetti Measurer

09-28-2010 09:41 PM by Div | 18 comments »

CS1 Spaghetti Measurer How do you ever know how much spaghetti to cook? Either you have to eat pasta 3 days in a row or you have to drown it in sauce to fill the plate. This handy little Spaghetti Measurer will remove the guess work. It is an easy project, suitable for woodworkers of all skill levels. The only tools required are a drill, a selection of Forstner bits, a coping saw and some sandpaper, off course. I made this one from a piece of African Rosewood, 10mm thick and arou...

Read this entry »


View TJ65's profile

basket weave boxes

08-25-2010 11:56 AM by TJ65 | 35 comments »

Ok a little while ago I posted a project that was a box that was made to look like a basket weave. It is very striking to look at if you dont know how it is made and is really easy if you have a scroll saw. A few people were interested in the making of it so here goes- First thing first get yourself a pattern, there are a few books about making basket weave boxes. Or alternately you could make your own. Once you have a pattern- You need two different patterns( look closely as these are...

Read this entry »


View SPalm's profile

Steps Cutting Board Version 2 (Two Step)

08-18-2010 03:03 AM by SPalm | 85 comments »

This is a second generation Steps cutting board made out of walnut, maple, and cherry. The first Steps board I made used a basic square with edge of maple and cherry to make it a block and a notch to do the stepping. I wanted to try to make a stepping board using the hex Tumbling Block design, and this is what I came up with. In order to make the hex do the stepping, I needed to notch all three sides, as can be seen in the Sketchup drawing. The cool thing here is that it steps in two di...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com