LumberJocks

Toy Construction #114: Sprint race car motor, seat, rear end

  • Advertise with us
Blog entry by htl posted 10-19-2016 10:56 PM 1262 reads 0 times favorited 6 comments Add to Favorites Watch
« Part 113: Sprint race car Frame Part 114 of Toy Construction series Part 115: Sprint race car gas tank, gluing it together. »

Needed to start with the things that will hold the two frames together.
This is being made with what wood is left over from other project.
Cherry walnut and oak dowels.

I haven’t read one bit of the instructions just using the pictures to get er done.
When I get near finished and things aren’t going right I’ll read the fine print and see what I did wrong. lol
The Gatto plans have a lot a reading instructions but these plans came with a full sheet with all the part pictured so you can copy, print and then cut them out and glue to your wood can’t get much easier than that.


Sorry but that’s all I got done today.

-- Learn More About Making Wooden Models. An Index Of My Model making Blogs. http://lumberjocks.com/htl/blog/116729



6 comments so far

View crowie's profile

crowie

2503 posts in 2003 days


#1 posted 10-19-2016 11:03 PM

That looks good Bruce and I like the logic of your assembly….

-- Lifes good, Enjoy each new day...... Cheers from "On Top DownUnder" Crowie

View htl's profile

htl

3956 posts in 1211 days


#2 posted 10-19-2016 11:16 PM

I should add that all the big parts are dry fit so I will be able to shape and buff everything when the time comes.

-- Learn More About Making Wooden Models. An Index Of My Model making Blogs. http://lumberjocks.com/htl/blog/116729

View ralbuck's profile

ralbuck

4690 posts in 2318 days


#3 posted 10-20-2016 01:09 AM

Very well thought out and ambitious project! Looking great!

-- Wood rescue is good for the environment and me! just rjR

View LittleBlackDuck's profile

LittleBlackDuck

1842 posts in 872 days


#4 posted 10-20-2016 01:09 AM

Lucky dowel is circular… otherwise you’d finish up with a box-cage rather than a roll-cage.

Keep them there posts a rolling.

-- If your first cut is too short... Take the second cut from the longer end... LBD

View htl's profile

htl

3956 posts in 1211 days


#5 posted 10-20-2016 04:35 AM

It would have been nice and more accurate to do it all with dowels[the frame] but my would be metal brackets will be mostly hid by the fairings and such.

-- Learn More About Making Wooden Models. An Index Of My Model making Blogs. http://lumberjocks.com/htl/blog/116729

View JoeinGa's profile

JoeinGa

7739 posts in 2059 days


#6 posted 10-20-2016 12:54 PM

The glue-up of all those dowel frame pieces must have sucked BIG TIME !

I’m thinking you must have more patience than me …

-- Perform A Random Act Of Kindness Today ... Pay It Forward

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com