Hi Mike , thankyou.
Today I finished gluing up the doors, gave them a good sanding and hung them.
I built the doors to have a 1/16” reveal on the top bottom and hinge side, however on the hinge side I didn’t mortise them into the frame or door, so that leaves around 1/4” gap, that needs to be filled in
, so I cut some 1/8” thick strips and glued them on the hinge side, to close the gap to make it look more appealing.
then worked on a drawer for the bottom section
finally took a piece of 3/4” thick plywood, to make a top for the cabinet.
Next I have the shelves to do, as well as some wooden pulls and latches for the doors and drawer, then begin the punched aluminum panels.
Have a great day.