Hi guys, Here is a commisioned job a guy gave me to do a while back.It is a podeum, he wanted it made from a recycled alter rail, the alter rail was an old rail built up of oak pieces, with fancy columns and details, it was around 10 ft. long, ...
|View hobby1's:||home||workshop||projects (2)||blog (52)||reviews (0)||forum topics (6)||buddies (0)||favorites (0)||activity log|
None so far
297 posts in 1112 days
Latest Activity | view all »
Latest Projects | view all 2 »
Latest Blog Entries | view all 52 »
I’m building a auxilary fence for my craftsman table saw, the fence that came with it is very acurate, however it is a light aluminum frame, and using the holes provided to bolt on auxilary fence boards for jigs and things, may cause the fen...
I was given a job to build a frame with diagonal slats spanning the inside, where the corner of the end slats fitted into the corner of the frame and the slats met equally throughout the frame, at a given angle.It was easy doing it with three sla...
This was made from some scrap cherry boards, the boards this guy gave me from his shop were around 1 1/8” thick rough milled which I tried to salvage any good stuff from it, the most I could get was around 2 1/2” wide pieces, these boa...
This was the main branch that broke off the tree, I started yesterday with this project by stripping all the bark off completely down to the bare whitewood, with my angle grinder, then I used my dremel to smooth out all the loose rough jagged edge...