LumberJocks

helluvawreck's Forum Topics

  • Advertise with us
View helluvawreck's:homeworkshopprojects (5)blog (36)reviews (0)forum topics (58)buddies (144)favorites (184)activity logWatch
09-24-2014 03:56 PM

What's the best way to finish cypress for an outside project? - 18 replies

My brother in law bought an old wrought iron bench and the wood is mostly gone. Even though I don’t have the time I agreed to give him a hand on it and I’m not going to charge him a dime because we are pretty close. He wants to do as much of the work as he can so hopefully there is an easy finish that a beginner can put on the wood p...

09-09-2014 02:55 PM

I need a source for no. 4 brass screws - 15 replies

I need a good source for no. 4 wood screws. Brass round head #4×3/8 threaded all the way is what I would like to find. Flat head might work but they need to be threaded all the way. I’m trying to get by with just a simple drill bit for the pilot hole. If the thread is not full length then the neck will probably cause a problem sinc...

09-02-2014 01:57 PM

Time of post on the pulse page doesn't seem right - 2 replies

Cricket, ‘the time of post’ column seems messed up. It’s very confusing and also takes up more space. It’s probably and accident but in case it’s not I wish that you would change it back. BTW, ya’ll are doing a great job overall. Thanks. edit: it may also be the personal homepage as well. helluvawreck ak...

08-24-2014 03:13 PM

International Woodworking Fair - 13 replies

I went to the IWF Wednesday, Thursday, and Saturday in Atlanta. I laid out on Friday to give my feet a little rest. I was just wondering if anyone else attended to see all of the equipment and supplies. helluvawreck aka Charleshttp://woodworkingexpo.wordpress.com

07-23-2014 03:14 PM

Box hinges - 13 replies

I sure would appreciate some information on sources for box hinges with stops. I don’t have a problem with using the brusso hinges on the more expensive boxes but there is no way to justify them on the less expensive boxes. Thanks in advance for the info. helluvawreck aka Charleshttp://woodworkingexpo.wordpress.com

06-29-2014 08:00 PM

I have just updated my workshop page. - 14 replies

I have just updated my workshop page and hope to complete it by tomorrow afternoon so please take a look. Thanks, helluvawreck aka Charleshttp://woodworkingexpo.wordpress.com

02-11-2014 03:34 PM

What a great time to sit by the fire and look at woodworking books and magazines. - 27 replies

With the snow in North Georgia this morning it’s a great time to just sit in my armchair in front of the fireplace and look through my collection of books and magazines for project and design ideas. My wife and one of my daughters are also with me. helluvawreck aka Charleshttp://woodworkingexpo.wordpress.com

05-23-2013 07:06 PM

Legalese trumps all other languages. - 11 replies

Title is self explanatory. helluvawreck aka Charleshttp://woodworkingexpo.wordpress.com

05-15-2013 05:31 PM

Skill - 16 replies

Lumberjocks!!! If you use it you improve it. If you don’t use it you loose it. If you’ve quit you’ve lost it because you’ve given up.

05-07-2013 05:16 PM

What do you think about G8749 Drum / Flap Sander and Accessories? - 5 replies

Is the G8749 a good sander to have for Intarsia and similar crafts? I also have a Jet oscillating spindle sander. Where do you get the finer grit sanding sleeves and flaps/brushes (220, 320 and above)? Thanks in advance for your help. helluvawreck aka Charleshttp://woodworkingexpo.wordpress.com

02-11-2013 06:14 PM

I've Just Put a Link to the Full Film About Ben's Mill - 1 reply

I have just put a link on Sprucegums thread to where you can see the full film about Ben’s Mill. The full film is about twice as long as the first. The second half shows Been building a heavy duty horse sled for another farmer. Here's the link back to Sprucegums thread where I put the link to the full film. Enjoy, I know I did. hellu...

02-06-2013 07:07 PM

Speaking of Shops - Take a Look at Chiefwoodworker's Shop - I love it - 8 replies

Chiefwoodworker is a fellow Lumberjock and I have looked his shop over many times since I began to plan my own. I love his shop and he builds beautiful furniture as well. His shop is only 30’ x 30’ but looks much bigger. He has a drawing of his layout and also about 187 pictures of what he does in his shop. He’s very impressive...

02-06-2013 06:05 PM

My New Shop's Electrical System - What do you think? - 46 replies

After I get my 30’ x 30’ shop dried in I plan on sheeting the inside with plywood. I like to be able to use nails and screws to hang stuff where ever I want to. I’m planning on installing a 200 AMP service (not 3 phase) to the shop that is completely separate of the house. I will mount the box on the surface of the interior ply...

01-30-2013 09:13 PM

Been to the cellar room 3 times today - tornado warnings. - 20 replies

More tornadoes here. I’ve learned not to mess with tornadoes. When we hear the warning siren my wife and I don’t take chances. We go outside around the corner of our house, open the storm doors, and go down the steps into the cellar room (10’ x 10’) 7’ under the house. I’ve gone down there 3 times today. My wi...

01-24-2013 05:04 PM

I May Be Going Daffy - I Just Ordered a Complete Setup for My Lathe - 37 replies

Like I said, I may be going daffy. I’ve had people warn me about getting into turning. They’ve said you’ll be sorry. They’ve said you’ll get hooked. Well, we’ll see. I just ordered, two chucks, a drill chuck for my tailstock, a faceplate, a couple of books, and a DVD, and a set of turning tools. It will all be...

12-07-2012 06:29 PM

Maybe the oldest surviving woodworking shop? - 5 replies

I just went to the FWW website and noticed this article. I thought some of you might be interested. Here's another article. helluvawreck aka Charleshttp://woodworkingexpo.wordpress.com

08-15-2012 08:29 PM

I apologize for the last two post on global warming. I was not aware of the new rules. - 183 replies

Welcome, Nathan, ya’ll have a great site. I want to apologize about posting today, in the last hour or so, on the thread about global warming. I have’nt participated as much as I normally do during the last week or so. I have posted on a few projects only because I have just been really busy. Because I have been very busy I did...

07-22-2012 04:05 PM

Lumberjocks, I need a source for 6" X 48" sanding belts in 250 to 320 grit belts. - 10 replies

Lumberjocks, I need a good source for good but affordable 6” X 48” 250, 280, and 320 grit sanding belts. Do you know of such a source where they stock it and allow you to buy 1 or 2 pieces of each or a combination of a half dozen mixed grits? If they also stock the lower grits but allow you to mix the grits I could buy 1 dozen at a t...

07-04-2012 01:45 PM

I'm a Yankee Doodle Dandee, Born On the Fouth of July - 25 replies

One of the things that I always like to do on my birthday, usually in the morning, is watch and listen to James Cagney singing Yankee Doodle Dandy. I don’t know what it’s really called but this ones for you fine folks so Happy Birthday, America and God Bless. I hope you all have a safe and happy fourth. helluvawreck aka Charleshtt...

06-21-2012 11:17 AM

Beautiful Woodwork in the Mancaves of 15 Famous Men - 7 replies

Take a look at these. “The shop is just through those doors. This is just where I come to relax.” helluvawreckhttps://woodworkingexpo.wordpress.com

1 2 3 next »
58 topics


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase