In this video, I have a nice piece of figured walnut, and resaw it to make book matched drawer fronts. These pieces get laminated to another piece of walnut. I also make a small frame for the hutch to rest on the top, and make the top. And of cour...
|View Guy Dunlap's:||home||workshop||projects (2)||blog (28)||reviews (0)||forum topics (0)||buddies (9)||favorites (1)||activity log|
104 posts in 724 days
Location: Indianapolis, IN
Latest Activity | view all »
Latest Projects | view all 2 »
Latest Blog Entries | view all 28 »
In this video, I make the center divider for the drawers in the base. I also add some kickers for the drawers. After sanding, I glue it up taking special care to line up the inlay on the rails with the legs. As always, I welcome your questions ...
I start out by creating a template for the oval fan medallions that will be recessed into the front of the leg. I then work on the recesses for the banding that will go on the rails. The banding on the legs at the top must match the rails exactly,...
I start out with some 12/4 walnut, and cut 4 legs, making sure I use rift sawn lumber. Using a turning that I made for a template, I turn all 4 legs. Then I start on the joinery. This is traditional mortise and tenon joinery throughout, and I show...
First I work on making the “pillars” for the architectural details in the front of the hutch. Then I carve the “foundations” for the pillars with a chisel. I cut the top to size, and using the router table, I form the decorative edge. Again, I use...