LumberJocks

goggy's Blog

  • Advertise with us
This blog is written by goggy | 6 entries so far

Latest Entry

Craftsman Entertainment Center (applying finish)

03-12-2014 12:43 AM by goggy | 7 comments »

Here is the witches brew. Similar recipes have been used; I apply honey amber tint first which I thin to 1/2 ounce per quart of water. In my experience, anything stronger has a negative effect on QSWO with larger fleck. I then apply Early American stain after lightly knocking down with 320 grit. Since I am using Waterlox, I will not use shellac. I rub in 3 coats: sanding after each one with 320. I then use a double boiler method mixing brown shoe polish with paste wax. Here is the melted mix. It’s not applied until dry. After applying the wax with 0000 steel wool and a slight buff, the is the end result. After sealing and waxing the entire piece, I’ll post a pi...

Read this entry »

Older Entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase