LumberJocks

LumberJocks Woodworking Forums

  • Advertise with us
All Topics Replies Last post
View Mark's profile

LJ's...I run into a stain/finish problem...im cryin for help!

12-14-2010 08:21 PM by Mark in Woodworking Skill Share

So this is my problem… I am working on a project for a client and IR...

12 12-15-2010 01:17 AM
View Chriskmb5150's profile

Woodpeckers 12" T-square rule - SOLD

11-23-2010 06:45 PM by Chriskmb5150 in Woodworking Trade & Swap

Sold

2 12-15-2010 12:04 AM
View yellowtruck75's profile

State College PA Arts Fest entry?

12-14-2010 11:50 AM by yellowtruck75 in Sweating for Bucks Through Woodworking

I know this will only apply to a small area but I am trying to find an entry ...

3 12-14-2010 10:48 PM
View Knothead62's profile

Cutting MDF/laminate

12-11-2010 09:15 PM by Knothead62 in Power Tools, Hardware and Accessories

I have a piece of countertop that I want to use for an art center for my gran...

5 12-14-2010 10:22 PM
View DrJosh's profile

ebonizing wood

12-14-2010 07:14 PM by DrJosh in Woodworking Skill Share

I have a beautiful pice of black and white ebony that I want to pair with som...

4 12-14-2010 09:41 PM
View GMman's profile

Recycling

12-12-2010 09:55 PM by GMman in LumberJocks.com Site Feedback

If people would take the time to visit in back of those large stores like Wal...

13 12-14-2010 04:32 PM
View therookie's profile

Walnut Pen Blanks

11-21-2010 11:57 PM by therookie in Woodworking Trade & Swap

I have about 400 walnut pen blanks for sale. I have them cut at 3/4” by...

11 12-14-2010 02:49 PM
View newbiewoodworker's profile

New Ridgid Table Saw?

12-11-2010 09:36 PM by newbiewoodworker in Power Tools, Hardware and Accessories

I was wondering how the general population of this forum feels regarding the ...

7 12-14-2010 10:51 AM
View GrandpawB's profile

scroll saw suggestions

12-12-2010 06:34 PM by GrandpawB in Power Tools, Hardware and Accessories

I rarely use my Ryobi scroll saw because the tensioner is such a pain in the ...

6 12-14-2010 06:51 AM
View Scotty Stepp's profile

Table Top Support Stretchers

12-14-2010 01:53 AM by Scotty Stepp in Woodworking Skill Share

The kitchen table top (4’x6’) I glued together has a mind of its ...

2 12-14-2010 06:39 AM
View DrDirt's profile

Learning Resolution for 2011?

12-13-2010 11:07 PM by DrDirt in Woodworking Skill Share

Anybody planning sessions at the woodworking schools out there? ALso any oth...

3 12-14-2010 06:38 AM
View n00b's profile

Titebond III dries nearly black?

12-06-2010 02:34 AM by n00b in Power Tools, Hardware and Accessories

I’ve just taken up woodworking recently, and I’ve run into a prob...

29 12-14-2010 06:27 AM
View GMman's profile

Tip

12-13-2010 08:57 PM by GMman in Woodworking Skill Share

http://www.finehomebuilding.com/item/14627/how-to-form-small-concrete-project...

3 12-14-2010 05:46 AM
View PeteMoss's profile

Cutting board question

12-06-2010 02:03 PM by PeteMoss in Woodworking Skill Share

I understand the reasoning behind end grain cutting boards, what with the not...

13 12-14-2010 05:38 AM
View Vrtigo1's profile

No reviews of Grizzly 0654 jointer?

12-10-2010 06:12 PM by Vrtigo1 in Power Tools, Hardware and Accessories

Found one of these on my local Craigslist in almost new condition for $250 an...

5 12-14-2010 05:14 AM
View TopamaxSurvivor's profile

Dado for botton in dovetailed or box jointed box

12-13-2010 01:34 AM by TopamaxSurvivor in Woodworking Skill Share

What is the best way and sign of quality to do the groove for the bottom? Cu...

10 12-14-2010 02:51 AM
View TopamaxSurvivor's profile

flattening water stone on concrete

12-13-2010 11:29 AM by TopamaxSurvivor in Woodworking Skill Share

I just searched this subject and nothing popped up ;-( I have been thinking ...

21 12-14-2010 02:41 AM
View DraftsmanRick's profile

Bees wax for cutting boards

12-13-2010 07:27 PM by DraftsmanRick in Woodworking Skill Share

I normally use walnut oil, General finishes salad bowl finish, or mineral oil...

5 12-14-2010 02:39 AM
View Jonathan's profile

Can this maple be flattened in time for Christmas?

12-07-2010 09:18 PM by Jonathan in Woodworking Skill Share

I ran into a problem a couple of days ago after resawing some curly maple. ...

12 12-14-2010 12:58 AM
View HorizontalMike's profile

How To Give A Proper Wedgie

12-12-2010 04:42 PM by HorizontalMike in Woodworking Skill Share

As a relative noobie building my fist really major project I have noticed two...

12 12-14-2010 12:41 AM

« prev 1 ... 2476 2477 2478 2479 2480 2481 2482 ... 3485 next »
69692 topics

RSS FEED

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com