Safety in the Woodworking Shop Forum

  • Advertise with us

Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and lungs are all at risk when working with wood. Share your tips and stories of “lessons learned” to help others protect their health.

Topics Replies Last post
View Seamus0559's profile

Old plasterboard. HELP!

12-27-2013 02:46 AM by Seamus0559

Hi all, I am removing a wall in my 1909 four square. I was surprised when I h...

15 04-24-2017 11:22 AM
View AdamScudder's profile

Woodwork classes in Long Island ? ? ?

05-19-2012 11:57 AM by AdamScudder

Hey guys this post goes out in particular to anybody living in Long Island, b...

25 04-23-2017 11:09 PM
View dorald's profile


04-20-2017 12:51 PM by dorald

Has anyone in the community coated their shop floor with a product called ...

0 04-20-2017 12:51 PM
View mrramsey's profile

Opinions on the Grizzly G0777 Cyclone?

10-28-2016 01:06 PM by mrramsey

Hey guys – I have been searching all over looking for any information o...

10 04-19-2017 12:16 AM
View Dzhaughn's profile

Router table parallel rip in 2 passes

04-11-2017 01:29 AM by Dzhaughn

I am a beginner. Here is a crazy idea that occurred to me to do this parallel...

22 04-17-2017 12:06 PM
View Knot_in_my_wood's profile

I'm considering opening a pay-as-you-go Woodshop in Northern Virginia.

04-14-2017 09:22 PM by Knot_in_my_wood

I have been doing some research and I have found some on the west coast, but ...

22 04-15-2017 05:27 PM
View lilredweldingrod's profile

Woodworking equipment and wheelchairs.....

10-23-2010 08:43 AM by lilredweldingrod

When I began woodworking, I was already in a wheelchair. As I collected my po...

84 04-11-2017 12:48 PM
View Sarit's profile

Cyclone accident

04-10-2017 12:15 AM by Sarit

So I bought an old Clearvue Cyclone used on CL not too long ago. Its one of t...

12 04-10-2017 11:27 PM
View JediMario's profile

Shark or Bork for old Grizzly saw

04-04-2017 03:52 PM by JediMario

Hello,I purchased a 2001 1023Z Grizzly Right tilt table saw. No splitter or r...

0 04-04-2017 03:52 PM
View leftcoaster's profile

Noise reduction for Dust Collector

04-03-2017 03:40 PM by leftcoaster

Hi, I have a Laguna C|Flux 1.5 horse dust collector. I keep it in an al...

3 04-04-2017 02:17 AM
View Chashint's profile

Bandsaw gave me a little bite

04-01-2017 07:29 PM by Chashint

This morning I decided to use the band saw to cut some oak firewood splits in...

18 04-02-2017 11:33 PM
View Rrrandy's profile

Best safety device(s)...

03-21-2017 09:07 PM by Rrrandy

I purchased my tablesaw 15 years ago. After suffering through a couple of kic...

40 03-29-2017 02:40 AM
View b_minus's profile

Dust Collection using wye off unit?

03-26-2017 04:37 PM by b_minus

Long time lurker here, and I have learned a lot…now its time to dive in...

8 03-28-2017 01:37 PM
View simonov's profile

Location for table saw crosscut stop block

03-27-2017 03:46 PM by simonov

I am designing a simple stop block set-up for cross cutting on my table saw. ...

4 03-27-2017 05:20 PM
View PhillipRCW's profile

Safest bit for pattern routing

03-23-2017 06:38 PM by PhillipRCW

I love to do different designs on my cutting boards or even pattern routing s...

3 03-24-2017 06:24 PM
View Medickep's profile

How to dado a PVC pipe

08-07-2015 02:37 AM by Medickep

I have a project I’m about to start on, which calls for a 3/4” da...

32 03-21-2017 01:51 PM
View Mike Turner's profile

Dust Collection and Respirators

03-13-2017 04:31 PM by Mike Turner

I have a small shop 20 by 20. I have a HF dust collector ,Wynn filter and The...

3 03-13-2017 09:32 PM
View bobmayfield's profile

Bandsaw Safety

03-07-2017 04:46 PM by bobmayfield

I love my bandsaw and use it frequently, but it seems like no one ever mentio...

1 03-07-2017 05:42 PM
View SpikeJ's profile

Kick back on router table

05-09-2011 04:58 PM by SpikeJ

Today I had kick back on router table. I am wondering what is the cause of th...

17 03-06-2017 05:30 PM
View Will Stokes's profile

Grounding your Dust Collection System

01-31-2010 10:56 PM by Will Stokes

So I’ve finally broken down and decided to get serious about dust colle...

46 03-03-2017 06:05 PM

1 2 3 4 ... 65 next »
1285 topics

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics