LumberJocks

Woodturning Forum

  • Advertise with us

On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Topics Replies Last post
View StripeEsox's profile

Help! Newbie with a lathe

09-24-2015 03:51 PM by StripeEsox

Hello all! I recently acquired a lathe that I would like to start playing ...

8 09-25-2015 02:55 PM
View TheDane's profile

Easy Wood Tools has been acquired by Pony Tools

09-15-2015 06:30 PM by TheDane

For those who may have missed it … here’s the press release: E...

4 09-24-2015 01:38 PM
View JoeinGa's profile

Bicycle powered lathe?

09-17-2015 12:14 AM by JoeinGa

Somebody sent me this link. Pretty interesting. Now if I could only find some...

16 09-24-2015 08:30 AM
View Rick M.'s profile (online now)

What do you like in a lathe control panel?

09-10-2015 05:01 PM by Rick M.

I’m curious what you like or dislike about your lathe’s controls?...

36 09-24-2015 08:19 AM
View toddbeaulieu's profile

Buying an older lathe - Advice?

09-06-2015 10:59 PM by toddbeaulieu

Hello, I’m finally ready for a lathe. I’ll want to learn everythi...

34 09-22-2015 02:37 AM
View REO's profile

has anyone needed....special tailstock?

03-01-2015 01:29 PM by REO

Hey Folks! I have been a production turner for a long time. I have occasional...

6 09-18-2015 02:38 AM
View Mark's profile

Issues with the chain saw

09-15-2015 03:11 AM by Mark

Try as I might I cannot slice a green log in down the centre. i have a 12A 1...

8 09-17-2015 11:56 PM
View Targa's profile

Is A Jet JWL_1221VS Midi Lathe Worth $215 More Than A Rikon 70-220 VDR Midi Lathe

10-27-2014 07:55 PM by Targa

I’m planning to purchase a variable speed midi lathe with a 12” s...

27 09-17-2015 03:01 AM
View 3285jeff's profile

might have messed my lathe up

09-15-2015 11:47 PM by 3285jeff

well I have a 70-100 rikon mini lathe and I turned a large bowl on it,,well i...

6 09-16-2015 12:26 PM
View moke's profile

Carbide inserts

08-01-2014 05:07 PM by moke

For those of you that use some carbide insert turning tools. have you noticed...

24 09-16-2015 03:05 AM
View Jack Lewis's profile

Sharing segmented turning plans

09-12-2015 11:46 PM by Jack Lewis

I admit I plagiarize some turners ideas. I then utilize the ideas to draft (...

4 09-13-2015 09:25 PM
View ForestGrl's profile

Using a buffing system

09-12-2015 12:37 AM by ForestGrl

I set up the PSI 3-wheel buffing system last night, and applied (I think!) th...

4 09-12-2015 02:48 AM
View stonecarver's profile

Lathe advice????

09-11-2015 12:05 AM by stonecarver

I’m about to trade for a lathe, but being new to it not sure if it̵...

11 09-12-2015 12:05 AM
View Vince's profile (online now)

Home made Ball Jig

12-08-2013 06:20 PM by Vince

Went to the Woodworking Show in Costa Mesa, California and saw th...

6 09-10-2015 02:41 PM
View Nubsnstubs's profile

Where'd it go?

09-02-2015 05:14 PM by Nubsnstubs

I video everything I do at the lathe, so, there is always evidence of some du...

12 09-10-2015 03:59 AM
View kmetzger's profile

Insert for Nova DVR XP

09-06-2015 09:37 PM by kmetzger

I just bought a Nova DVR XP from Tools Plus and it comes with an Infinity chu...

11 09-10-2015 12:26 AM
View DW833's profile

Glue up for a post to use for spindle turning a lamp.

09-05-2015 03:00 AM by DW833

I need a 4”x4”x24” post for spindle turning a lamp. Thinki...

14 09-09-2015 01:12 AM
View Wildwood's profile

Nice Video

09-05-2015 07:22 PM by Wildwood

New video from Lyle https://www.youtube.com/watch?v=uv7WFX8b_nc

3 09-06-2015 10:14 PM
View ForestGrl's profile

Rubber bands on chuck jaws...

09-05-2015 12:18 AM by ForestGrl

Watching a video the other day, and the gentleman had wrapped a large rubber ...

21 09-06-2015 01:55 PM
View ForestGrl's profile

Your experience with Sorby multi-tip??

09-04-2015 11:59 PM by ForestGrl

One of the tools I bought years ago (when I had $$, LOL) was a Sorby multi-ti...

3 09-05-2015 04:35 PM

« prev 1 ... 10 11 12 13 14 15 16 ... 68 next »
1341 topics


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com