Jigs & Fixtures Forum

  • Advertise with us

Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of course, questions.

Topics Replies Last post
View mmalinco's profile

Router bits for Porter Cable 7116 Omnijig

12-12-2014 03:18 PM by mmalinco

Apparently the correct router bit to use with a P-C 7116 Omnijig dovetail jig...

1 12-12-2014 08:41 PM
View Farrout's profile

Why I made a thin strip jig.

12-08-2014 04:57 PM by Farrout

5 12-09-2014 08:39 PM
View Angler's profile

Tapered sliding dovetails

12-08-2014 05:06 PM by Angler

Hello All,I’m new here, my name is John. I’ve searched for about ...

7 12-09-2014 07:17 AM
View Kelly's profile

Table Saw Set-up Guide

12-03-2014 10:32 PM by Kelly

I designed this guide back in the eighties, to allow me to be sure my table s...

2 12-04-2014 02:29 PM
View TheWoodenOyster's profile

I'm thru with the crosscut sled, Incra here I come

12-01-2014 11:24 PM by TheWoodenOyster

Hey guys, This past week, I made it a goal to replace my old not-so-accura...

28 12-03-2014 08:40 PM
View youngd24's profile

Mitered triangles

11-24-2014 01:47 PM by youngd24

I’m building a bunch of clamp storage shelves, each one has 2 triangle ...

16 12-01-2014 11:13 PM
View TheDane's profile

Honing Rig

11-29-2014 10:27 PM by TheDane

Built this 6” honing wheel to touch up my skews, chisels, etc. I...

2 12-01-2014 02:46 AM
View Dutchy's profile

Scharpning Jig

11-30-2014 06:24 PM by Dutchy

I want to make a jig on a small band sander and I hope there is someone who c...

2 11-30-2014 08:43 PM
View MarkTheFiddler's profile

Out-feed\In-feed roller stand.

11-29-2014 12:28 AM by MarkTheFiddler

I have kinda sorta wanted to buy some of those adjustable height roller stand...

9 11-30-2014 12:28 AM
View runswithscissors's profile

Thin Strip Cutting Jig for TS

10-24-2014 01:10 AM by runswithscissors

From time to time a question comes up concerning the sawing of thin strips on...

20 11-25-2014 08:33 PM
View Arcola60's profile

Bandsaw Brazing Fixture

11-11-2014 02:41 AM by Arcola60

I just finished fabricating my band saw brazing fixture. It came out real...

9 11-24-2014 04:38 AM
View edwood1975's profile

Dovetail Joint with a router table...

11-19-2014 09:10 PM by edwood1975

So the short story of this is: my wife has asked me to make her a nail polish...

9 11-21-2014 12:33 AM
View Dutchmn's profile

Dowel making plate

11-15-2014 01:22 AM by Dutchmn

A few weeks I’m looking through the scrap metal bin at work and the shop fore...

4 11-20-2014 05:44 AM
View Micah Muzny's profile

Dovetail jig questions.

11-16-2014 01:03 AM by Micah Muzny

I was looking at getting a dovetail jig. I like the 24 inch capacity leigh an...

9 11-16-2014 11:29 PM
View unbob's profile

Shaper tenoning jig

11-13-2014 02:38 PM by unbob I came acr...

12 11-16-2014 08:59 PM
View Alask's profile

Homemade Side Sharpening Jig (handplane iron)

11-15-2014 10:55 PM by Alask

Hello fellows, This time I would like to share my side sharpening jig.I ma...

2 11-15-2014 11:12 PM
View edwood1975's profile

What do I use to support my router to the table?

11-12-2014 07:48 PM by edwood1975

I am building my own router table and I have a Ryobi 1.5hp fixed base . I ...

2 11-13-2014 09:22 PM
View Shuja's profile

bench vise

11-12-2014 04:03 PM by Shuja

Recently I bought a 6” metal bench vise for about 5 bucks. The plates a...

5 11-13-2014 03:30 PM
View FancyShoes's profile

Delta Mortis fixture

11-08-2014 08:35 PM by FancyShoes

Hey guys I picked this up today as well for $25, curiouser as to how it mount...

4 11-09-2014 09:21 PM
View FancyShoes's profile

What are these clamps for?

11-09-2014 08:22 PM by FancyShoes

I picked up six of these clamps from the auction yesterday with a bunch o...

4 11-09-2014 09:14 PM

« prev 1 ... 12 13 14 15 16 17 18 ... 57 next »
1129 topics

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics