LumberJocks

footprints's Favorites

  • Advertise with us
View BritBoxmaker's profile

Impossible II

1487 days ago by BritBoxmaker | 18 comments »

Hi everyone. Here is the method for making the Impossible II. Before we start I didn’t take any photos during the build for this one. I needed to concentrate full time on it and taking pics can be distracting. The CAD drawings provided here should do the job . I’ve seen Steve (spalm) use this sort of thing to great effect. I’m not giving exact sizes, you can scale things off of the pics. This will give you the angles too, mostly 60°. First the complete pattern You ...

Read this entry »


View Sinister's profile

Cutting board build blog.

1600 days ago by Sinister | 30 comments »

I recently uploaded pictures of a cutting board (http://lumberjocks.com/projects/30543) and several fellow LJs asked me to show how it was put together. Subsequently, Patron quickly deduced the process and wrote a nice blog showing the step by step process for how to achieve the pattern. I encourage anyone who is interested to take a look because he has some nice pictures outlining the process. http://lumberjocks.com/patron/blog/15074. I thought I would add a short amendment to his blog de...

Read this entry »


View FrankLad's profile

Cyanoacrylate wood finish?

1862 days ago by FrankLad | 23 comments »

I thought “What if I coated the whole ring in cyanoacrylate finish?” ...and I tried it. The rings have since been through regular everyday wear including dishwashings, handwashings and showers. END RESULT: This finish is holding up better than both Waterlox and Arm-R-Seal. And, in my opinion, it actually looks better. CAVEATS: Obviously, this would be difficult to do on anything but very small woodworking projects. It’s just right for these wooden rings, but ...

Read this entry »


View FrankLad's profile

Handcrafted Wooden Rings

1943 days ago by FrankLad | 54 comments »

I received a couple of comments with regards to how I build the wooden rings in my gallery, so I thought this would be a good place to share a bit about my process. This will not be the best-worded blog entry. I’ll just kinda let my mind spill… My very first rings were done in the bentwood style, which involves some trial-and-error, custom jigs, a great amount of patience and an even greater amount of time to achieve the contrast similar to the rings done in the layered sty...

Read this entry »


View dustbunny's profile

All in One Jig Part 1 #1: Diamonds and Triangles

1793 days ago by dustbunny | 42 comments »

After posting the quilted lazy susan project, http://lumberjocks.com/projects/21623, many of you said you would like to see the jig for this project. I set out immediately to upgrade the jig. There were cuts I wanted to incorporate into this jig, and my original was warping and needed repair anyway. So here it is – 24” X 33” I am pretty proud of this jig, not only because I made it, but because the cuts made from this jig are right on the money. The first ...

Read this entry »


View stefang's profile

Making a Wooden Hinge For Your Box - Tutorial

1676 days ago by stefang | 53 comments »

While the rest of the world is going forward I seem to be going in the other direction, ie; wooden hinges. I bought a book from FWW back in 1998 showing router projects and techniques culled from past magazine articles. There was an article there by Rob Cosman.which included a method of making wooden hinges. This is the type of hinge in question shown on my box below. ““ ““ Main Problems producing a hinge using Rob Cosman’s method In Cosman’s a...

Read this entry »


View Karson's profile

Baltimore WoodShow - Vendor with a new item -- Inlays

1693 days ago by Karson | 19 comments »

I just got back from the Baltimore (Timonium) Wood Show, and as I was walking down the last aisle after visiting with LJ member Chuck Bender. I noticed this gentleman sitting on a stool doing some strange things with wood. His name is Geoffrey Noden. Geoffrey in the man that has his name on the Noden AdjustABench It was in his booth that his wife was looking after the Adjust a bench and he was sitting at a stool in front of this tool. What this tool does is cut patterns in wood are then...

Read this entry »


View SPalm's profile

Handcut Endgrain Inlay

1685 days ago by SPalm | 22 comments »

This is so stolen from Geoffrey Noden of the AdjustABench. He demo’ed this at the Wood Show and Karson blogged about it. I thought it was pretty cool, and since it is not on the market yet, I thought I would make my own. Not sure what I was doing, I made what looks like a paper cutter. The arm rides between two longer sides to keep it stable and square. It is about two feet long. The cutter bar is hinged with a bolt so that it is level when it is 3/4 of an inch above the base. This let...

Read this entry »


View lew's profile

Kitchen Treasures #1 Making the Celtic Knot Rolling Pin #2: Laying Out the Blank

2155 days ago by lew | 4 comments »

This second part will concentrate on the layout of the rolling pin blank in preparation for cutting the slots. Create a blank that is 22” long and 2” square. Locate the center of the length (11”) and carry a line around the blank. The ellipses are 11” long and made of three pieces of 1/8” thick materialLayout a mark 5 ½” on either side of the center line and accurately carry the lines around the blank. To assist in laying out the diagonals, use a 3/8” thick spacer gauge, drawing lines...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase