LumberJocks

fisherdoug09's Favorites

  • Advertise with us
View Paul Stoops's profile

A Simple Fix for a Vexing Problem

01-27-2014 02:21 AM by Paul Stoops | 4 comments »

One of the most favorite tools in my shop is my Performax (Jet) 16-32 Plus drum sander. I use it on almost every project. However, this power tool has one characteristic that has proven to be a great vexation to me over the last 15 years – the tendency to trip the motor circuit breaker while sanding. This one part blog describes my journey to find a solution to this problem. The 1 1/2HP Jet drum sander drive motor has a thermal circuit breaker rated at 15 Amperes. Exceeding this limit for ...

Read this entry »


View MyChipCarving's profile

How to line the bottom of a box

01-25-2014 02:37 PM by MyChipCarving | 8 comments »

Read this entry »


View cassiet717's profile

Beautiful Juniper Slabs For Sale

01-13-2014 05:33 PM by cassiet717 | 2 comments »

We have two, large juniper slabs for sale in Overgaard, AZ. The largest measures roughly 34 3/4” x 63” and is 3” thick, we are asking $225. The narrower of the two measures about 21’ across the middle x 57” tall and is 2 1/4” thick, and we are asking $150.We have more slabs of comparable size that we are willing to sell, and more pictures are available upon request.

Read this entry »


View Don's profile

Making a Small Wooden Box #3: Lid and Trays

08-21-2007 04:12 AM by Don | 16 comments »

This past week has been less productive than I would have liked. I’ve been struggling with a flue, thus operating at less than full capacity. I worked in the shop last Wednesday, and took some pictures showing the installation of the splines in the spline slots shown in my previous episode of Making a Small Wooden Box. Unfortunately, my photo card was corrupted, so I lost all of those pictures. Today, I will show you the continuation of making the lid and a start on one of the tra...

Read this entry »


View stefang's profile

Shop Made Dowels The Easy Way & Two Useful Ways to Use Them

03-08-2010 10:09 PM by stefang | 37 comments »

Why make dowels when you can buy them cheap? Well, you can’t buy dowels in every kind of wood. Also you might be working on a project and you don’t want to take the time to go to the store to get them, or maybe you like to be self sufficient like me. Dowels made on a lathe or with a router jig take a lot of set-up time. With this method you only have to prepare the stock, do a little carving on each end and in about 30 seconds you have a nice long dowel. If you like that idea a...

Read this entry »


View Stevinmarin's profile

Wooden book keepsake box

02-01-2013 10:34 PM by Stevinmarin | 17 comments »

I guess it’s called a book box, but that sounds like a box for storing books. More on this project and plans available here.

Read this entry »


View Bob Simmons's profile

Router Inlay Practice - The Diamond

02-07-2013 11:36 PM by Bob Simmons | 13 comments »

This is a routing technique that can be used with great accuracy when inlaying wood veneer. A compact router is used along with a shop-made router template. The video was taken during a time of router inlay practice within the woodworking shop. Sometimes it’s nice to be able to relax, experiment in the shop to develop methods of work for an upcoming woodworking project. Your comments are welcomed. Routing Wood the Easy Way ...The Apprentice and The Journeyman ...Learn more,...

Read this entry »


View mnpete's profile

Get Woodworking with Lancelot Link...I mean lots of links!

02-08-2013 08:55 AM by mnpete | 0 comments »

If you’re new to woodworking…hey, you’re hanging out in the right places! Check out some of my favorite places to get your woodworking juices going. http://secondwindworkshop.blogspot.com/2013/02/lancelot-link-i-mean-thats-lot-of-links.html

Read this entry »


View Bob Simmons's profile

Bandsaw Resaw Method

01-15-2013 07:05 PM by Bob Simmons | 17 comments »

This is a bandsaw resaw method that I much prefer over the traditional method of resawing. In the following article I share the advantages of this resawing method. How to Cut Great Veneer The Apprentice and The Journeyman ...Learn more, experience more!

Read this entry »


View Kent Shepherd's profile

Box Building #5: Barrel Hinge Installation

03-22-2012 09:50 PM by Kent Shepherd | 21 comments »

After showing some of my boxes in “Projects”. I have received some inquiries about the installation of the barrel hinges I sometimes use. I hope this helps for some of you. I know it will be overkill for many of you, so just use what you wish. With any type hinge, the layout is critical. These hinges are simple to install, but you must get your holes in the right place. If you don’t, I can assure you , you will not like the results, and you will not be able to go back and...

Read this entry »


1 2 3 4 5 next »
47 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase