LumberJocks

exelectrician's Blog

  • Advertise with us
This blog is written by exelectrician | 15 entries so far

Latest Entry

Curved front hall table #2: Curved front hall table #2

01-08-2015 09:33 PM by exelectrician | 6 comments »

To make the top six ribbon sapele offcuts from my wood supply shop were edge glued, planed, and joined. Then I used the template with a 3” diameter ring centered and carpet taped to my router base to trim the jigsawed oval shape to the final dimension. First I routed a classic ogee on the top edge and put a 3/8” round over on the back, my wife preferred the ogee to be on the down side, so the rounded side became the top!I put Daleys ‘Benite’ to seal all the surfaces and then fastened the top with screws. Then put two coats of Daleys ‘Seafin’ wiping varnish on. This completes the build for the table. Thanks for looking, and your comments are welcome!

Read this entry »

Older Entries

View all 15 entries »


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase